25008

在产

Single head system

全部替代型号

技术参数

电源
No-load supply current	I 0 \| ≤ 30 mA
Operating voltage	U B \| 10 ... 30 V DC , ripple 10 % SS
Rated operating current	I e \| 100 mA , short-circuit/overload protected
Voltage drop	U d \| ≤ 3 V
交流 / 直流特性
Repeat accuracy	≤ 1 %
Response delay	approx. 30 ms
Switching frequency	f \| ≤ 13 Hz
Transducer frequency	approx. 400 kHz
环境与封装
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Temperature influence	± 1.5 % of full-scale value
其他
Adjustment range	20 ... 200 mm
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection type	Connector plug M12 x 1 , 4-pin
Dead band	0 ... 15 mm
Default setting	Switch point A1: 20 mm Switch point A2: 200 mm
Degree of protection	IP67
Diameter	12 mm
Housing	brass, nickel-plated
Housing brass, nickel-plated Transducer epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT	Housing \| brass, nickel-plated \| Transducer \| epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT
Input type	1 program input operating distance 1: -U B ... +1 V, operating distance 2: +6 V ... +U B input impedance: > 4,7 kΩ program pulse: ≥ 1 s
LED red	solid red: Error red, flashing: program function, object not detected
LED yellow	indication of the switching state flashing: program function object detected
Length	70 mm
Length 70 mm Diameter 12 mm	Length \| 70 mm \| Diameter \| 12 mm
Mass	25 g
Output type	1 switch output NPN Normally open/closed , programmable
Range hysteresis	H \| 1 % of the set operating distance
Sensing range	15 ... 200 mm
Standards	EN IEC 60947-5-2:2020 IEC 60947-5-2:2019
Standards EN IEC 60947-5-2:2020 IEC 60947-5-2:2019	Standards \| EN IEC 60947-5-2:2020 IEC 60947-5-2:2019
Standard target plate	100 mm x 100 mm
Transducer	epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT
UL approval	cULus Listed, Class 2 Power Source

器件图片

实物照片 · 产品库

技术资料

该型号暂未收录资料。