39334
在产Read head, RS-485 interface, with RS-485 terminal resistor
全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| Operating voltage | U B | 10 ... 30 V DC |
| Power consumption | P 0 | 2 VA |
| Switching voltage | Operating voltage |
| 交流 / 直流特性 | |
| Noise immunity | DIN EN 61000-6-2 , DIN EN 12016 |
| Resolution | ± 0.4 mm (1,250 positions/m) |
| 环境与封装 | |
| Operating temperature | 0 ... 60 °C (32 ... 140 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| 其他 | |
| Address | 0 |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection type | 5-pin, M12 x 1 connector |
| CSA approval | cCSAus Certified, General Purpose Class 2 power source |
| Data output code | binary code |
| Degree of protection | IP54 |
| Diagnostic Coverage (DC) | 0 % |
| Emitted interference | DIN EN 61000-6-4 , DIN EN 12015 |
| Error indicator | LED red flashing: read head outside of code rail solid on: internal diagnostic test failed |
| Free tolerances to code rail | horizontal: 31 mm ( ± 15.5 mm ) vertical: 28 mm ( ± 14 mm ) |
| Housing | ABS , PC (Polycarbonate) |
| Housing ABS , PC (Polycarbonate) | Housing | ABS , PC (Polycarbonate) |
| Interface type | RS 485 interface |
| Mass | 500 g |
| Measuring length | max. 314.5 m |
| Mission Time (T M ) | 20 a |
| MTTF d | 236 a |
| Operation indicator | LED green: power on |
| Order information | Mounting plate included with delivery |
| Output velocity | switching output short-circuit protected |
| Passage speed | v | ≤ 12.5 m/s |
| Photobiological safety | exempt group according to EN 62471:2008 |
| Protocol | 1 , 2 |
| Relative humidity | 90 % , non-condensing |
| Shock resistance | DIN EN 60068-2-27, half sine 30 g, 18 ms |
| Termination | with RS 485 termination |
| Transfer rate | 62.5 kBit/s |
| Velocity indicator | LED yellow off, if speed limit is exceeded |
| Vibration resistance | DIN EN 60068-2-6, sine, 5 g, 10 - 2000 Hz, 10 cycles |
器件图片
技术资料
该型号暂未收录资料。