全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| Current loading capacity | ≤ 100 mA Total current , overload and short-circuit protected |
| Rated operating current | I e | ≤ 40 mA / max. 150 mA |
| Rated operating voltage | U e | 18.5 ... 31.6 V from AS-Interface |
| Supply | from AS-Interface |
| Voltage | ≥ (U e - 7.0 V) |
| 交流 / 直流特性 | |
| Noise immunity | EN 61000-6-2:2005 EN 62026-2:2013 |
| 环境与封装 | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Contacts CuSn / Au Housing PBT PC Body PUR, black Cable PUR Mounting screw Stainless steel 1.4305 / AISI 303 | Contacts | CuSn / Au | Housing | PBT PC | Body | PUR, black | Cable | PUR | Mounting screw | Stainless steel 1.4305 / AISI 303 |
| Height | 21.5 mm |
| Height 21.5 mm Width 27.7 mm Length 40.5 mm | Height | 21.5 mm | Width | 27.7 mm | Length | 40.5 mm |
| Mounting screw | Stainless steel 1.4305 / AISI 303 |
| Storage temperature | -25 ... 80 °C (-13 ... 176 °F) |
| 其他 | |
| AS-Interface | EN 62026-2:2013 |
| AS-Interface specification | V3.0 |
| Body | PUR, black |
| Cable | PUR |
| Color | black |
| Connection | AS-Interface: AS-Interface flat cable Outputs & matching connector: M12 connector, 5-pin, A-coded, acc. to IEC 61076-2-101:2012 |
| Contacts | CuSn / Au |
| Cores | 5 x 0.34 mm 2 |
| D0 | - OUT1 |
| D0 - OUT1 D1 - OUT2 D2 - OUT3 D3 - OUT4 | D0 | - OUT1 | D1 | - OUT2 | D2 | - OUT3 | D3 | - OUT4 |
| D1 | - OUT2 |
| D2 | - OUT3 |
| D3 | - OUT4 |
| Data bits (function via AS-Interface) | Input Output |
| Degree of protection | EN 60529:2000 |
| Directive 2014/30/EU | EN 62026-2:2013 |
| Directive 2014/30/EU EN 62026-2:2013 | Directive 2014/30/EU | EN 62026-2:2013 |
| Electrical safety | IEC 61140:2004 |
| Emitted interference | EN 61000-6-4:2011 |
| Fieldbus standard | EN 62026-2:2013 |
| Housing | PBT PC |
| ID1 code | 7 |
| ID2 code | 7 |
| ID code | A |
| IO code | 7 |
| LED AS-i | AS-Interface voltage; LED green |
| LED FAULT | error display; LED red red: communication error or address is 0 red flashing: Output supply overload |
| Length | L | 1 m |
| Mass | 81 g |
| MTBF | 382 a |
| Node type | A/B node |
| Number/Type | 4 electronic outputs, PNP, overload and short-circuit proof |
| P0 | communication monitoring P0 = 1 (default settings), monitoring = ON, i.e. if communication fails, the outputs are de-energised P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their condition |
| P1 | not used |
| P2 | Synchronous mode P2 = 0 synchronous mode on P2 = 1 synchronous mode off (default settings) |
| P3 | not used |
| Parameter bits (programmable via AS-i) | function |
| Profile | S-7.A.7 |
| Protection class | III |
| Required gateway specification | V3.0 |
| Sheath diameter | ∅4.8 mm |
| Sheath diameter ∅4.8 mm Color black Cores 5 x 0.34 mm 2 Length L 1 m | Sheath diameter | ∅4.8 mm | Color | black | Cores | 5 x 0.34 mm 2 | Length | L | 1 m |
| Shock and impact resistance | 30 g , 11 ms in 6 spatial directions 3 shocks 10 g , 16 ms in 6 spatial directions 1000 shocks |
| Surge protection | U e : Over voltage category III, safe isolated power supplies (PELV) |
| Tightening torque, cable gland | 0.4 Nm |
| Tightening torque, fastening screws | 1.65 Nm |
| UL approval | cULus Listed, Type 1 enclosure |
| UL File Number | E223772 "For use in NFPA 79 Applications only" |
| Vibration resistance | 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles |
| Width | 27.7 mm |
器件图片
技术资料
该型号暂未收录资料。