全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| Available voltage | terminals 1+, 2-: ≥ 16 V at 20 mA , ≥ 18.5 V at 4 mA |
| Input/power supply | basic insulation according to IEC 61010-1, rated insulation voltage 300 V eff |
| Output/power supply | functional insulation, rated insulation voltage 50 V AC |
| Power consumption | 2 W |
| Power dissipation | approx. 1.4 W at 20 mA transfer current, 250 Ω in both outputs |
| Rated voltage | U r | 19 ... 30 V DC |
| Short-circuit current | terminals 1+, 2-: 25 mA |
| Voltage drop | terminals 3, 4: ≤ 6.1 V at 20 mA |
| 交流 / 直流特性 | |
| Frequency range | field side into the control side: bandwidth with 0.5 V pp signal 0 ... 7.5 kHz (-3 dB) control side into the field side: bandwidth with 0.5 V pp signal 0.3 ... 7.5 kHz (-3 dB) |
| Protection against electrical shock | UL 61010-1:2012 |
| Ripple | within the supply tolerance |
| Rise time/fall time | 2 ms |
| Settling time | 6 ms |
| 环境与封装 | |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions |
| Dimensions | 12.5 x 124 x 114 mm (0.5 x 4.9 x 4.5 inch) (W x H x D) , housing type A2 |
| Height | 124 mm |
| Height 124 mm Width 12.5 mm Depth 114 mm | Height | 124 mm | Width | 12.5 mm | Depth | 114 mm |
| Influence of ambient temperature | current output: 0.25 µA/K voltage output: 80 µV/K |
| Influence of ambient temperature current output: 0.25 µA/K voltage output: 80 µV/K | Influence of ambient temperature | current output: 0.25 µA/K voltage output: 80 µV/K |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| 其他 | |
| Configuration | via DIP switches |
| Connection | Power Rail or terminals 9+, 10- |
| Connection side | field side |
| Control elements | DIP switch |
| Degree of protection | IEC 60529:2001 |
| Depth | 114 mm |
| Deviation | I out < 20 µA (0.1 %); V out < 7.5 mV (0.15 %) incl. calibration, linearity, hysteresis and fluctuation of supply voltage, at 20 °C (68 °F), 0/4 ... 20 mA, 0/1 ... 5 V |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Directive 2014/30/EU EN 61326-1:2013 (industrial locations) | Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Display elements | LED |
| Electromagnetic compatibility | NE 21:2012 EN 61326-3-2:2008 |
| Input/Output | basic insulation according to IEC 61010-1, rated insulation voltage 300 V eff |
| Input resistance | terminals 1+, 2-: max. 500 Ω (BRAIN) (250 Ω load) |
| Input signal | 0/4 ... 20 mA |
| Labeling | space for labeling at the front |
| Load | channel 1: 0 ... 500 Ω (20 mA)/> 1 MΩ (5 V) channel 2: 0 ... 500 Ω (20 mA)/> 1 MΩ (5 V) |
| Mass | approx. 100 g |
| Note | Both output loads must be connected to ensure complete and correct operation within the technical specification. |
| Output/Output | functional insulation, rated insulation voltage 50 V AC |
| Output signal | 0/4 ... 20 mA or 0/1 ... 5 V |
| Safety Integrity Level (SIL) | SIL 2 |
| Signal type | Analog input |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Systematic capability (SC) | SC 3 |
| Width | 12.5 mm |
器件图片
技术资料
该型号暂未收录资料。