onsemi美国
IC PWR SWITCH P-CH 1:1 6MICROFET
1.8-5.5V输入、100-250mA可调限流的集成负载开关，MicroFET 2x2 6L封装，具备ESD保护和故障输出。规格书核对
全部替代型号
查看完整报告技术参数
规格书核对参数
17 项| 参数 | 值和测试条件 | 出处 |
|---|---|---|
| 封装 | MicroFET 2x2 6L | |
| 工作温度 | Min: -40°C, Max: 85°C | |
| 输入电压范围 | 1.8 to 5.5V | |
| 导通电阻 | Typ: 250mΩ @ VIN=5.5V, IOUT=200mA, TA=25°C; Typ: 275mΩ @ VIN=3.3V, IOUT=200mA, TA=25°C | |
| 限流范围 | 100-250mA (min) | |
| 限流容差 | 5% @ 250mA (min) |
全部参数（22 项）
| 电源 | |
|---|---|
| Current - Output (Max) | 625mA |
| Voltage - Load | 1.8V ~ 5.5V |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| 环境与封装 | |
| Mounting Type | Surface Mount |
| Operating Temperature | -40°C~85°C(TA) |
| Package | Tape & Reel (TR); Cut Tape (CT); Digi-Reel® |
| Package / Case | 6-WDFN Exposed Pad |
| Supplier Device Package | 6-MicroFET (2x2) |
| 其他 | |
| Base Product Number | FPF2 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Features | Auto Restart, Load Discharge, Status Flag |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Mfr | onsemi |
| Number of Outputs | 1 |
| Output Configuration | High Side |
| Output Type | P-Channel |
| Product Status | Last Time Buy |
| Ratio - Input:Output | 1:1 |
| Rds On (Typ) | 140mOhm |
| Series | - |
| Switch Type | General Purpose |
引脚与封装
MicroFET 2x2 6L (BOTTOMVIEW)
| 脚位 | 名称 | 功能 | 出处 |
|---|---|---|---|
| 1 | ISET：限流设置输入，通过接地电阻设置开关的限流值 | ||
| 2 | VIN：电源输入，功率开关的输入和IC的供电电压 | ||
| 3 | VOUT：开关输出，功率开关的输出 | ||
| 4 | FLAGB：故障输出，低电平有效，开漏输出，指示过流、欠压或过温状态 | ||
| 5 | GND：地 | ||
| 6 | ON：开/关控制输入 |
器件图片
技术资料
规格书核对内容由 AI 从原厂规格书提取，点页码查看原文。