The LP38855 is a high-current, fast-response regulator which can maintain output voltage regulation with an extremely low input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: V BIAS provides power for the internal bias and control circuits, as well as drive for the gate of the N-MOS power transistor, while V IN supplies power to the load. The use of an external bias rail allows the part to operate from ultra low V IN voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability. The fast transient response of this device makes it suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The LP38855 is available in TO-220 and DDPAK/TO-263 5-Lead packages. Dropout Voltage: 130 mV (typical) at 1.5A load current. Low Ground Pin Current: 10 mA (typical) at 1.5A load current. Shutdown Current: 1 µA (typical) I IN(GND) when EN pin is low. Precision Output Voltage: ±1.0% for T J = 25°C and ±2.0% for 0°C ≤ T J ≤ +125°C, across all line and load conditions
全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| Dropout voltage (Vdo) (typ) (mV) | 130 |
| 交流 / 直流特性 | |
| Accuracy (%) | 2 |
| Noise (µVrms) | 150 |
| PSRR at 100 KHz (dB) | 37 |
| 环境与封装 | |
| Operating temperature range (°C) | -40 to 125 |
| Thermal resistance θJA (°C/W) | 60 |
| 其他 | |
| Features | Enable |
| Fixed output options (V) | 0.8, 1.2 |
| Iout (max) (A) | 1.5 |
| Iq (typ) (mA) | 10 |
| Load capacitance (min) (µF) | 10 |
| Output options | Fixed Output |
| Rating | Catalog |
| Regulated outputs (#) | 1 |
| Vin (max) (V) | 5.5 |
| Vin (min) (V) | 0.98 |
| Vout (max) (V) | 1.2 |
| Vout (min) (V) | 0.8 |