NIDEC COMPONENTS products lineup, You can refer to the detail of Polymer Resettable Circuit Protector PRCP-USMF. PRCP-USMF005 PRCP-USMF010 PRCP-USMF150 PRCP-USMF020 PRCP-USMF035 PRCP-USMF050 PRCP-USMF075 PRCP-USMF110 PRCPUSMF005 PRCPUSMF010 PRCPUSMF150 PRCPUSMF020 PRCPUSMF035 PRCPUSMF050 PRCPUSMF075 PRCPUSMF110
全部替代型号
查看完整报告技术参数
| 环境与封装 | |
|---|---|
| Maximun device surface temperature in tripped state | 125 ℃ maximum |
| MSL (Moisture Sensitivity Level) | Level 1, J-STD-020 |
| Operating Temperature | - 40 ℃ ~ + 85 ℃ |
| Peak Temperature (Tp) | 260 ℃ |
| PREHEATTemperature Min (Tsmin)Temperature Max (Tsmax) Time (Tsmin to Tsmax) (ts) | 150 ℃ 200 ℃ 60 ~ 180 Sec |
| Thermal Shock | - 40 ℃ ~ + 85 ℃, 20 cycles: ± 10 % typical resistance change |
| Time 25 ℃ to Peak Temperature | 8 minutes max. |
| TIME MAINTAINED ABOVE: Temperature (TL) Time (tL) | 217 ℃ 60 ~ 150 Sec |
| Time within 5 ℃ of Actual Peak Temperature (tp) | 20 ~ 40 Sec |
| 其他 | |
| Average Ramp-Up Rate (Tsmax to Tp) | 3 ℃ / Sec max. |
| Humidity Aging | 85 ℃, 85 %RH, 1000 h: ± 5 % typical resistance change |
| Model | Ambient operating temperature： Ihold / Itrip (A) |
| Passive Aging | 85 ℃, 1000 h: ±5 % typical resistance change |
| Profile Feature | Pb-Free Assembly |
| Ramp-Down Rate | 6 ℃ / Sec max. |
| Solvent Resistance | MIL-STD-202 method 215: No change |
| Vibration | MIL-STD-883C, Method 2007.1, Condition A: No change |