全部替代型号
查看完整报告技术参数
| 电源 | |
|---|---|
| Max. current/voltage rating with resistive load | - silver contacts (A or 1) : 4A 30VDC- gold plated brass contacts (CD or 0) : 0,4VA 20VAC or DC- gold plated silver contacts (AD or 2) : 4A 30VDC (300mA 30VDC for gold plating) |
| 环境与封装 | |
| Moisture | The insulating materials employed and the complete seal permit the switches to withstand a 56 days moisture test (IEC 68-2-3). |
| Operating temperature | -20°C to +85°C |
| Soldering - thermal shock (S series only) | The switches are especially designed for flow soldering at 260°C during 5 seconds owing to high temperature polymer parts. |
| Storage temperature | -40°C to +85°C |
| 其他 | |
| Dielectric strength | 1.000 Vrms 50 Hz min. |
| Electrical Functions | ON MOM |
| Initial contact resistance | 10 mΩ max. |
| Insulation resistance | 1.000 MΩ min. |
| Iron soldering (SF series) | 300°C 5 sec. max. |
| Levers | Short Standard |
| Mechanical strength | Terminals are strengthened by a bracket or a ground plate ensuring the rigidity of the switch on the board. Actuator strength is 10N max. |
| Number Of Poles | Single Pole |
| Solderability | The switches are tested at 235°C according to IEC 68-2-20 after accelerated aging. |
| Terminals | Right Angle Horizontal |
| Terminal Spacing | 4.7mm (0.185) or 3.81mm (0.150) |