Pepperl+Fuchs, Inc.Germany
117653
ActiveSurge protector, Ethernet-APL, field mounting, Ex ia, Ex d, Ex e, 20 mm ISO thread
All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Current | I i | 500 mA |
| Impulse discharge current (10/350 µs) | I imp | 0.5 kA per line |
| Max. surge current (8/20 µs) | I max | 5 kA overstressed fault mode 1 acc. to IEC 61643-21 |
| Nominal discharge current (8/20 µs) | I n |
| Rated current | I r | 500 mA |
| Rated voltage | U r | 30 V |
| Voltage | U i | 30 V |
| Voltage protection level | U p |
| Environment and package | |
| Ambient temperature | -50 ... 80 °C (-58 ... 176 °F) |
| Design / Mounting | Outside installation |
| Mounting | ISO 20 mm |
| Storage temperature | -50 ... 90 °C (-58 ... 194 °F) |
| Other | |
| Approved for | Ex ia [ia Ga] IIC T6 Gb , Ex ia [ia Da] lIIC T80°C Db , Ex ia [ia Ma] l Mb , Ex db eb mb IIC T6 Gb , Ex db eb mb I Mb , Ex db [ia Ga] IIC T6 Gb |
| Approved for Ex ia [ia Ga] IIC T6 Gb , Ex ia [ia Da] lIIC T80°C Db , Ex ia [ia Ma] l Mb , Ex db eb mb IIC T6 Gb , Ex db eb mb I Mb , Ex db [ia Ga] IIC T6 Gb | Approved for | Ex ia [ia Ga] IIC T6 Gb , Ex ia [ia Da] lIIC T80°C Db , Ex ia [ia Ma] l Mb , Ex db eb mb IIC T6 Gb , Ex db eb mb I Mb , Ex db [ia Ga] IIC T6 Gb |
| Climatic conditions | IEC 60721 |
| Connection type | wire ends APL + red , APL - black , protective conductor (PE) green/yellow |
| Core cross section | APL +, APL - 0.8 mm 2 , PE 1.3 mm 2 |
| Degree of protection | IEC/EN 60529 |
| Directive 2014/34/EU | EN 60079-0:2018 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN 60079-18:2015 , EN 60079-1:2014 , IEC TS 60079-47:2021 |
| Directive 2014/34/EU EN 60079-0:2018 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN 60079-18:2015 , EN 60079-1:2014 , IEC TS 60079-47:2021 | Directive 2014/34/EU | EN 60079-0:2018 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN 60079-18:2015 , EN 60079-1:2014 , IEC TS 60079-47:2021 |
| Ethernet | Ethernet-APL , IEEE 802.3 for 10BASE-T1L |
| EU-type examination certificate | TÜV 22 ATEX 8786 X |
| Housing material | Stainless steel 1.4401/316 |
| IECEx approval | IECEx TUR 22.0017X |
| Impulse rating | 2 kV/1 kA (category C1) per line 5 kV/2,5 kA (category C2) per line 0,5 kA (category D1) per line |
| Installation in hazardous area | Zone 1 |
| Interface type | Ethernet-APL auxiliary device |
| Internal capacitance | C i | negligible 0 nF |
| Internal inductance | L i | negligible 0 µH |
| Line/Earth | max. 1800 V C1 , 1 kA per line max. 2100 V C2 , 2.5 kA per line max. 50 V C3 , 50 A per line max. 1400 V B2 , 50 A per line |
| Line/Earth max. 1800 V C1 , 1 kA per line max. 2100 V C2 , 2.5 kA per line max. 50 V C3 , 50 A per line max. 1400 V B2 , 50 A per line | Line/Earth | max. 1800 V C1 , 1 kA per line max. 2100 V C2 , 2.5 kA per line max. 50 V C3 , 50 A per line max. 1400 V B2 , 50 A per line |
| Marking | 2-WISE auxiliary device |
| Mass | 200 g |
| per line | 2.5 kA |
| per line 2.5 kA total 5 kA | per line | 2.5 kA | total | 5 kA |
| Shock resistance | EN 60068-2-27 |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Surge protection | IEC 61643-21 |
| total | 5 kA |
| Vibration resistance | EN 60068-2-6 |
Documents
No documents are linked to this part yet.