All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 50 mA |
| Operating voltage | U B | 10 ... 30 V DC , ripple 10 % SS |
| Rated operating current | I e | 2 x 100 mA , short-circuit/overload protected |
| Voltage drop | U d | ≤ 3 V |
| AC and DC characteristics | |
| Repeat accuracy | ≤ 1 % |
| Response delay | approx. 125 ms |
| Switching frequency | f | max. 3 Hz |
| Transducer frequency | approx. 255 kHz |
| Environment and package | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Temperature influence | ± 1.5 % of full-scale value |
| Other | |
| Adjustment range | 90 ... 1000 mm |
| Beam width | wide |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection type | Connector plug M12 x 1 , 5-pin |
| Dead band | 0 ... 70 mm |
| Degree of protection | IP67 |
| Diameter | 18 mm |
| Housing | brass, nickel-plated |
| Housing brass, nickel-plated Transducer epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT | Housing | brass, nickel-plated | Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| Input type | 1 program input, operating range 1: -U B ... +1 V, operating range 2: +4 V ... +U B input impedance: > 4.7 kΩ; program pulse: ≥ 1 s |
| LED red | "Error", object uncertain in program function: No object detected |
| LED yellow | indication of the switching state flashing: program function object detected |
| Length | 75 mm |
| Length 75 mm Diameter 18 mm | Length | 75 mm | Diameter | 18 mm |
| Mass | 60 g |
| Output 1 | Switching point: 90 mm output function: Switch point operation mode output behavior: NO contact |
| Output 2 | Switching point: 1000 mm output function: Switch point operation mode output behavior: NO contact |
| Output type | 2 switch outputs NPN, normally open/closed , programmable |
| Range hysteresis | H | 1 % of the set operating distance |
| Sensing range | 70 ... 1000 mm |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
| Standards EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 | Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
| Standard target plate | 100 mm x 100 mm |
| Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| UL approval | cULus Listed, Class 2 Power Source |
Documents
No documents are linked to this part yet.