All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Input current | < 6 mA |
| No-load supply current | I 0 | max. 180 mA |
| Operating voltage | U B | 4.5 ... 30 V DC (SSI, SSI + RS422) ; 10 ... 30 V DC (SSI + Push/Pull) |
| Voltage drop | U B - 2.5 V |
| AC and DC characteristics | |
| Noise immunity | DIN EN 61000-6-2 |
| Overall resolution | up to 16 Bit |
| Single turn up to 16 Bit Overall resolution up to 16 Bit | Single turn | up to 16 Bit | Overall resolution | up to 16 Bit |
| Switch-on delay | < 10 ms |
| Time delay before availability | t v | < 250 ms |
| Environment and package | |
| Operating temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Other | |
| Axial | 40 N |
| Axial 40 N Radial 110 N | Axial | 40 N | Radial | 110 N |
| Cable | ∅7 mm, 6 x 2 x 0.14 mm 2 , 1 m |
| Climatic testing | DIN EN 60068-2-3, no moisture condensation |
| Code course (counting direction) | cw descending (clockwise rotation, code course descending) |
| Combination 1 | housing: powder coated aluminum flange: aluminum shaft: stainless steel |
| Combination 2 (Inox) | housing: stainless steel flange: stainless steel shaft: stainless steel |
| Connector | type 9416 (M23), 12-pin, type 9416L (M23), 12-pin |
| Degree of protection | DIN EN 60529, IP65 (without shaft seal) ; DIN EN 60529, IP66/IP67 (with shaft seal) |
| Detection type | photoelectric sampling |
| Device type | Singleturn absolute rotary encoder |
| Emitted interference | DIN EN 61000-6-4 |
| High | 4.5 ... 30 V |
| High 4.5 ... 30 V Low 0 ... 2 V | High | 4.5 ... 30 V | Low | 0 ... 2 V |
| Input type | Selection of counting direction (cw/ccw) |
| Interface type | SSI ; SSI + incremental track |
| Linearity | ± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0,5 LSB at 12 Bit |
| Low | 0 ... 2 V |
| Mass | approx. 460 g (combination 1) approx. 800 g (combination 2) |
| Moment of inertia | 50 gcm 2 |
| Monoflop time | 20 ± 10 µs |
| Output code | Gray code, binary code |
| Output type | RS422, Push/Pull |
| Pulses | 1024, 2048, 4096 |
| Radial | 110 N |
| Rotational speed | max. 12000 min -1 |
| Shock resistance | DIN EN 60068-2-27, 100 g , 6 ms |
| Signal output | A+B+/A+/B |
| Single turn | up to 16 Bit |
| Standard conformity | RS 422 |
| Starting torque | < 5 Ncm |
| Transfer rate | 0.1 ... 2 MBit/s |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
| Vibration resistance | DIN EN 60068-2-6, 20 g , 10 ... 2000 Hz |
Documents
No documents are linked to this part yet.