47317

Active

Inductive sensor

All alternatives

Technical parameters

Power
No-load supply current	I 0 \| ≤ 15 mA
Off-state current	I r \| 0 ... 0.5 mA typ. 10 µA at 25 °C
Operating current	I L \| 0 ... 100 mA
Operating voltage	U B \| 10 ... 30 V DC
Voltage drop	U d \| ≤ 3 V
AC and DC characteristics
Switching frequency	f \| 0 ... 1500 Hz
Environment and package
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Height	5.5 mm
Height 5.5 mm Width 8 mm Length 25 mm	Height \| 5.5 mm \| Width \| 8 mm \| Length \| 25 mm
Other
Assured operating distance	s a \| 0 ... 1.62 mm
Bending radius	> 10 x cable diameter
Cable diameter	2.3 mm ± 0.2 mm
Cable diameter 2.3 mm ± 0.2 mm Bending radius > 10 x cable diameter Material PVC Color black Number of cores 3 Core cross section 0.09 mm 2 Length L 0.5 m	Cable diameter \| 2.3 mm ± 0.2 mm \| Bending radius \| > 10 x cable diameter \| Material \| PVC \| Color \| black \| Number of cores \| 3 \| Core cross section \| 0.09 mm 2 \| Length \| L \| 0.5 m
CCC approval	CCC approval / marking not required for products rated ≤36 V
Color	black
Connection type	cable
Core cross section	0.09 mm 2
Degree of protection	IP67
Diagnostic Coverage (DC)	0 %
Housing material	PC
Hysteresis	H \| typ. 5 %
Installation	flush
Length	L \| 0.5 m
Mass	5 g
Material	PVC
Mission Time (T M )	20 a
MTTF d	828 a
Number of cores	3
Output polarity	DC
Output type	NPN
Rated operating distance	s n \| 2 mm
Reduction factor r 304	0.63
Reduction factor r Al	0.25
Reduction factor r Brass	0.31
Reduction factor r Cu	0.2
Reverse polarity protection	reverse polarity protected
Short-circuit protection	pulsing
Standards	EN IEC 60947-5-2
Standards EN IEC 60947-5-2	Standards \| EN IEC 60947-5-2
Switching function	Normally closed (NC)
Switching state indicator	LED yellow
Tightening torque, fastening screws	≤ 0.7 Nm
UL approval	cULus Listed Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 100 mA
Width	8 mm

Documents

No documents are linked to this part yet.