All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Power consumption | P 0 | ≤ 1.3 W |
| Rated operating voltage | U e | 10 ... 30 V DC , ripple 10 % SS , limited power source (EN 60950) |
| AC and DC characteristics | |
| Operating frequency | 13.56 MHz |
| Environment and package | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Directive 2011/65/EU (RoHS) | IEC/EN 63000 |
| Directive 2011/65/EU (RoHS) IEC/EN 63000 | Directive 2011/65/EU (RoHS) | IEC/EN 63000 |
| Height | 40 mm |
| Height 40 mm Width 80 mm Length 108.5 mm | Height | 40 mm | Width | 80 mm | Length | 108.5 mm |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Other | |
| Base | diecast aluminum |
| Cable length | ≤ 3 m |
| Connection | connector M12 x 1 |
| Degree of protection | EN 60529 |
| Directive 2014/53/EU | EN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364 |
| Directive 2014/53/EU EN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364 | Directive 2014/53/EU | EN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364 |
| Distance between two heads | ≥ 150 mm |
| Distance between two heads ≥ 150 mm | Distance between two heads | ≥ 150 mm |
| Encapsulation compound | CY 221/HY 2966 |
| FCC approval | This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. |
| Housing | PBT |
| Housing PBT Base diecast aluminum Encapsulation compound CY 221/HY 2966 | Housing | PBT | Base | diecast aluminum | Encapsulation compound | CY 221/HY 2966 |
| IC approval | This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. |
| LED green/yellow | green: power on green flashing: read/write attempt performed yellow: data carrier detected |
| Length | 108.5 mm |
| Mass | approx. 380 g |
| MTBF | 110 a (Operation at +40 °C) |
| Physical | RS-485 point-to-point connection |
| Protocol | ASCII |
| Read distance | 0 ... 130 mm |
| Read distance 0 ... 130 mm Write distance 0 ... 130 mm Width max. 100 mm | Read distance | 0 ... 130 mm | Write distance | 0 ... 130 mm | Width | max. 100 mm |
| RFID | ISO/IEC 15693-2 ISO/IEC 15693-3 ISO/IEC 18000-3 |
| Transfer rate | 26 kBit/s |
| UL File Number | E87056 |
| Width | max. 100 mm |
| Write distance | 0 ... 130 mm |
Documents
No documents are linked to this part yet.