All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| No-load supply current | I 0 | ≤ 25 mA |
| Off-state current | I r | 0 ... 0.5 mA |
| Operating current | I L | 0 ... 200 mA |
| Operating voltage | U B | 10 ... 30 V DC |
| Voltage drop | U d | ≤ 3 V |
| AC and DC characteristics | |
| Switching frequency | f | 0 ... 350 Hz |
| Time delay before availability | t v | ≤ 5 ms |
| Environment and package | |
| Ambient temperature | -35 ... 70 °C (-31 ... 158 °F) |
| Height | 10 mm |
| Height 10 mm Width 25 mm Length 50 mm | Height | 10 mm | Width | 25 mm | Length | 50 mm |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Other | |
| Assured operating distance | s a | 0 ... 6.48 mm |
| Bending radius | > 10 x cable diameter |
| Cable diameter | 4.8 mm ± 0.15 mm |
| Color | black |
| Connection type | cable |
| Core cross section | 0.5 mm 2 |
| Degree of protection | IP67 / IP69K |
| Diagnostic Coverage (DC) | 0 % |
| E1 Type approval | 10R-04 |
| Housing material | PBT |
| Hysteresis | H | typ. 5 % |
| Installation | flush |
| Length | L | 2 m |
| Material | PUR |
| Mission Time (T M ) | 20 a |
| MTTF d | 1240 a |
| Number of cores | 4 |
| Output polarity | DC |
| Output type | PNP |
| Rated operating distance | s n | 8 mm |
| Reduction factor r 304 | 0.6 |
| Reduction factor r Al | 0.3 |
| Reduction factor r Cu | 0.2 |
| Reverse polarity protection | reverse polarity protected |
| Sensing face | PBT |
| Short-circuit protection | pulsing |
| Standards | EN IEC 60947-5-2 |
| Standards EN IEC 60947-5-2 | Standards | EN IEC 60947-5-2 |
| Switching function | complementary |
| Switching state indicator | LED yellow |
| Tightening torque | ≤ 5 Nm |
| UL approval | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA |
| Width | 25 mm |
| Wire end ferrules | yes |
Documents
No documents are linked to this part yet.