All alternatives
View full reportTechnical parameters
Key specs
Positions5
| Power | |
|---|---|
| Cable test voltage | 2000V |
| Nominal cable voltage | 300V |
| Overvoltage level | Ⅱ |
| Rated current | 4A |
| Rated voltage | 60V |
| Environment and package | |
| Ambient temperature | -25℃...80℃ |
| Other | |
| AWG signal wire | 22AWG |
| Cable length | 0.5m |
| Coil material | Zinc alloy, nickel plated |
| Conductor insulation material | PVC |
| Conductor material | Tinned copper |
| Conductor resistance | Maximum 94.2Ω/km (at 20 °C) ) |
| Connection method | Single wire |
| Contact carrier material | PA |
| Contact material | CuZn |
| Core diameter (including insulation layer) | 1.30±0.05mm |
| Cross section | 0.34mm² |
| Error-proof coding | A-Code |
| Flammability rating ,in line with UL94 | V0 |
| Insertion and pullout cycle | ≥ 100 |
| Insulation resistance | ≥ 100 MΩ |
| IP class | IP68 |
| Material contact surface | Au |
| Minimum order quantity | 100 |
| Number of potentials | 5 |
| Order number | 20030001100 |
| Packing unit | / |
| Pollution level | 3 |
| Products weight (without packaging) | / |
| SD-M12A-05P-FF-SH8A50-00A(H).dxf | Download |
| SD-M12A-05P-FF-SH8A50-00A(H).stp | Download |
| SD-M12X-XXP-FF-SH8XXX-00A(H).pdf | Download |
| Sealing cap | CAP-M12-MP-8002 |
| Sealing material | Silicon |
| Standards/specifications | IEC 61076-2-101 |
| Thickness, insulation | 0.203mm |
| Torque | 0.4 Nm |
| Type of installation | Installation in front of the board |
| UL AWM form | UL1061 |
| Wire color | 1 Brown 2 White 3 Blue 4 Black 5 Gray |
| Wire structure Signal wire | 17/0.16mm² |