5 Pin Configuration and Functi…

AM26LS32ACDR

ActiveDrivers, Receivers, TransceiversSOIC

IC RECEIVER 0/4 16SOIC

AM26LS32ACDR is a quadruple differential line receiver compliant with RS-422/RS-485 standards, operating at 5V supply, featuring 3-state outputs and open-input fail-safe, in a 16-pin SOIC package with an operating temperature range of 0°C to 70°C.Checked against the datasheet

See alternatives Ask AI FAEDatasheet PDF

All alternatives

View full report

4 alternatives on file. Sign in to view them.

Technical parameters

Key specs

ProtocolRS-422

Drivers/Receivers4

Supply voltage4.75 ~ 5.25 V

Datasheet-verified parameters

19 items

Parameter	Value and test conditions	Source
Protocol	ANSI TIA/EIA-422-B, TIA/EIA-423-B, ITU V.10, V.11
Drivers / Receivers	4 Receivers
Supply Voltage	Min: 4.75 V, Nom: 5 V, Max: 5.25 V
Package	SOIC (D) 16-Pin
Operating Temperature	0°C to 70°C
Grade	Catalog
RoHS	Yes
Recommended Operating Conditions	VCC: 4.75 V to 5.25 V; TA: 0°C to 70°C
Absolute Maximum Ratings	VCC: 7 V; VI (Differential): ±25 V; Tstg: -65°C to 150°C
Common-mode Input Voltage	±7 V
Hysteresis Voltage	Typ: 50 mV
High-level Output Voltage	Min: 2.7 V (VCC=MIN, VID=1 V, I_OH=-440 μA)
Low-level Output Voltage	Max: 0.4 V (I_OL=4 mA); Max: 0.45 V (I_OL=8 mA)
Input Resistance	Min: 12 kΩ, Typ: 15 kΩ
Supply Current	Typ: 52 mA, Max: 70 mA (VCC=MAX, all outputs disabled)
Electrostatic Discharge (HBM)	±500 V
Electrostatic Discharge (CDM)	±2000 V
Storage Temperature	-65°C to 150°C
Pin Count	16

All parameters (16)ExpandCollapse

Power
Voltage - Supply	4.75V ~ 5.25V
Environment and package
Mounting Type	Surface Mount
Operating Temperature	0°C~70°C
Package	Tape & Reel (TR); Cut Tape (CT); Digi-Reel®
Package / Case	16-SOIC (0.154", 3.90mm Width)
Supplier Device Package	16-SOIC
Other
Base Product Number	AM26LS32
Data Rate	-
Duplex	-
Mfr	Texas Instruments
Number of Drivers/Receivers	0/4
Product Status	Active
Protocol	RS422, RS423
Receiver Hysteresis	50 mV
Series	-
Type	Receiver

Pinout and package

Pin	Name	Function
1	1B	(RS422/RS485 differential input, inverting)
2	1A	(RS422/RS485 differential input, noninverting)
3	1Y	(Logic level output)
4	G	(Active-High select)
5	2Y	(Logic level output)
6	2A	(RS422/RS485 differential input, noninverting)
7	2B	(RS422/RS485 differential input, inverting)
8	GND	(Ground)
9	3B	(RS422/RS485 differential input, inverting)
10	3A	(RS422/RS485 differential input, noninverting)
11	3Y	(Logic level output)
12		G̅ (Active-Low select)
13	4Y	(Logic level output)
14	4A	(RS422/RS485 differential input, noninverting)
15	4B	(RS422/RS485 differential input, inverting)
16	VCC	(Power supply)

Documents

DatasheetDatasheet · 2.0 MB · 2026-10-28

Open document center

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.