Microchip TechnologyUnited States
IC FLASH CONFIG 8M 8LAP
AT17F080-30CU is an 8Mbit FPGA configuration PROM in 8-pad LAP package, 3.3V supply, industrial temperature range -40°C to +85°C, supports ISP and 4-page partitioning, lead-free and halogen-free.Checked against the datasheet
All alternatives
View full reportTechnical parameters
Datasheet-verified parameters
24 items| Parameter | Value and test conditions | Source |
|---|---|---|
| Package | 8-pad LAP (8CN4) | |
| Operating Temperature | -40°C to +85°C | |
| Grade | Industrial | |
| RoHS | Compliant (Green, Pb/Halide-free/RoHS Compliant) | |
| Halogen Free | Yes (Halide-free) | |
| Memory Size | 8,388,608 x 1-bit (8-Mbit) |
All parameters (12)
| Power | |
|---|---|
| Voltage - Supply | 2.97V ~ 3.63V |
| Environment and package | |
| Memory Size | 8Mb |
| Mounting Type | Surface Mount |
| Operating Temperature | -40°C~85°C |
| Package | Tube |
| Package / Case | 8-TDFN |
| Supplier Device Package | 8-LAP (6x6) |
| Other | |
| Base Product Number | AT17F080 |
| Mfr | Microchip Technology |
| Product Status | Active |
| Programmable Type | FLASH |
| Series | - |
Pinout and package
Figure 1-1. Pinouts
| Pin | Name | Function | Source |
|---|---|---|---|
| ce | Chip Enable Input (Active Low). | ||
| ceo/a2 | Chip Enable Output (when SER_EN is High); Device Selection Input (when SER_EN Low). | ||
| clk | Clock Input. Used to increment the internal address and bit counter for reading and programming. | ||
| data | Three-state DATA Output for Configuration. Open-collector bi-directional pin for programming. | ||
| gnd | Ground. | ||
| reset/oe | Output Enable (Active High) and RESET (Active Low) when SER_EN is High. | ||
| ser_en | Serial Enable Input. Bringing SER_EN Low enables the 2-Wire Serial Programming Mode. | ||
| vcc | Device Power Supply. +3.3V (±10%) |
Documents
Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.