ODUGermany
Size: 0, IP50, Keying: A, Solder cup, Contact type: Pins, USB® 2.0 (480 Mbit/s), Overmolding, Cable type: USB cable 2.0 - By the meter (TPU), Second side: ODU® Straight push-pull plug
All alternatives
View full reportTechnical parameters
Key specs
Positions4
GenderMale
| Power | |
|---|---|
| nominalCurrentInsert | 7.5 |
| nominalCurrentInsertStandard | VDE 0298-4:2003 |
| nominalCurrentSingleContact | 7.5 A |
| nominalCurrentSingleContactStandard | IEC 60512-5-2:2002 (DIN EN 60512-5-2:2003) |
| testVoltage | 0.9 kV AC |
| testVoltageSAEStandard | SAE AS 13441:1998 method 3001.1 |
| Environment and package | |
| dimensionsDrawing | /medias/S20L-Drawing-Dimensions.jpg?context=bWFzdGVyfGltYWdlc3w4NjExM3xpbWFnZS9qcGVnfGFEazFMMmc0WlM4NE56azNPRFF5T1RrM01qYzRMMU15TUV4ZlJISmhkMmx1WjE5RWFXMWxibk5wYjI1ekxtcHdad3xjMTFlYTcxM2EwOTNiY2Q2NzBkODc2MmY3ZWIwZTI3MTYyMzU3NzNmYWMzZTdmODcyOWY1ZGMxZGMzMGI2MTY5 |
| maxOperatingTemperature | 80 °C |
| minOperatingTemperature | -30 °C |
| size | 0 |
| Other | |
| assemblyId | CS20LAC044FVT |
| assemblyNo | CS20LAC04 |
| bendReliefColor | Gray |
| cableColor | Black |
| cableDiameter | 4.2 mm |
| cableLengthRange | {'gte': 300, 'lte': 2900} |
| cableOutlet | Overmolding |
| cableType | USB cable 2.0 - By the meter (TPU) |
| codingDescriptionDrawing | /medias/L-Series-Key-Way-30-Degree.jpg?context=bWFzdGVyfGltYWdlc3w1NDk0NnxpbWFnZS9qcGVnfGFEQXdMMmcxTWk4NE56azNOelk0TkRneU9EUTJMMHhmVTJWeWFXVnpYMHRsZVY5WFlYbGZNekJmUkdWbmNtVmxMbXB3Wnd8MDM5YjI1ZGM0N2I2NTRiMzk0NDVmMWUzMGE3YzU0MzUzMWQyYmEwMWUwZTNjYmE3MGIxYWE5MzE2MjJhYTlhNg |
| conductor | Tin plated copper |
| configuredCableLength | 0 |
| connectionDiagram | <table> <thead> <tr> <th>Pos. ODU®</th> <th>Signal</th> <th>Color</th> <th>Pos. ODU®</th> </tr> </thead> <tbody> <tr><td>1</td><td>VBUS</td><td>Red</td><td>1</td></tr> <tr><td>2</td><td>D-</td><td>White</td><td>2</td></tr> <tr><td>3</td><td>D+</td><td>Green</td><td>3</td></tr> <tr><td>4</td><td>GND</td><td>Black</td><td>4</td></tr> <tr><td>Housing</td><td>–</td><td>Shield</td><td>Housing</td></tr> </tbody> </table> |
| contactDiameter | 0.7 mm |
| contactMaterial | Cu-alloy with gold finish |
| contactType | Pins |
| dataTransmission | USB® 2.0 (480 Mbit/s) |
| degreeOfProtection | IP50 |
| description | Cable assembly with straight push-pull plug with bend relief |
| drawingCableAssembly | /medias/2023-09-ODU-MS-L-USB-A-ODU-ODU-BEND.jpg?context=bWFzdGVyfGltYWdlc3wzODEwNXxpbWFnZS9qcGVnfGFEYzRMMmd4TlM4NE56azNOVGt5TVRJMU5EY3dMekl3TWpNdE1EbGZUMFJWTFUxVExVeGZWVk5DTFVGZlQwUlZMVTlFVlY5Q1JVNUVMbXB3Wnd8NzgyNDM5ZGM2YTgwZDliMTY2OTNjMDRhMTBiZjQ1MDc1NmM3MjZiYzU3NGE1NmRjYzQ2NWYwMTdkNWViODRiYg |
| enablePdf | False |
| exportDescription | Size: 0, IP50, Keying: A, Solder cup, Contact type: Pins, USB® 2.0 (480 Mbit/s), Overmolding, Cable type: USB cable 2.0 - By the meter (TPU), Second side: ODU® Straight push-pull plug |
| express | False |
| footNoteGeneral | Unless explicitly confirmed otherwise the contact arrangement of an ODU data transmission connector differs from a standard data transmission connector due to the robust ODU specific design. However, the ODU design meets the electrical specifications of the respective standard data transmission protocol. | ODU reserves the right to make changes based on the current state of knowledge without prior notice without being obliged to provide replacement deliveries or refinements of older designs. | All shown connectors are defined without breaking capacity (COC) according to IEC 61984:2008 (VDE 0627:2009). |
| footNoteInsert | Reverse gender on request |
| footNoteMechanical | *mated & unmated condition |
| footNoteTechnical | All shown connectors are rated to a safety extra low voltage (SELV) of less than 50 V AC / 75 V DC, according to IEC 61140:2016 (VDE 0140-1:2016) Protection against electric shock - Common aspects for installation and equipment. In case other standards rule a specific use of the connector, the application specific safety criteria shall be considered first. In this context, lower voltage ratings may be valid. Warning: Danger to life for operating voltages above 50 V AC / 120 V DC! |
| freeSample | False |
| insulatorMaterial | PEEK |
| keying | A |
| lockingPrinciple | Push-Pull |
| material | Cu-alloy with matt chrome finish |
| matingCycles | 5000 |
| maxCableLength | 2900 |
| maxClearanceDistance1 | 0.6 mm (Contact to contact) |
| maxClearanceDistance2 | 0.8 mm (Contact to housing) |
| maxCreepageDistance1 | 0.6 mm (Contact to housing) |
| maxCreepageDistance2 | 0.8 mm (Contact to housing) |
| metalOrPlastic | Metal circular connector |
| minCableLength | 300 |
| numberOfContacts | 4 |
| positionsDrawing | /medias/L-Series-Size-0-Contacts-Pins-U4.jpg?context=bWFzdGVyfGltYWdlc3w3MjQyNHxpbWFnZS9qcGVnfGFERTRMMmhpTkM4NE56azNOelk1TWpBek56UXlMMHhmVTJWeWFXVnpYMU5wZW1WZk1GOURiMjUwWVdOMGMxOVFhVzV6WDFVMExtcHdad3w4ZjA2YTEwMjQwZTRkOGE3M2NiMjIyNzYwYmIyMWUyNzNkZjE1ODRhNjUxMGYzZTUxZjQ0NDM0YTdhY2I4ZGE4 |
| priority | 11561155769710942 |
| productFamily | Circular connectors |
| productFamilyKey | c29473 |
| seal | False |
| secondSide | ODU® Straight push-pull plug |
| series | ODU MINI-SNAP® Series L |
| shielding | Geschirmt¦Shielded¦シールド¦带屏蔽的¦차폐¦Blindé¦Schermato¦shielded |
| specialFeature | Data transmission |
| specialFeatureKeys | data_transmission |
| termination | Solder cup |
| terminationDiameter | 0.85 mm |
| type | Cable Assembly |
| type2 | Plug |
| typeKey | cable_assembly |
| typeOfConnector | Straight |
| ULStyle | 20963 |
| wireCrossSection | AWG 28 |