Figure 5. FUSB302BMPX Pin Assi…

Figure 5. FUSB302BMPX Pin Assi…

onsemiUnited States

FUSB302BVMPX

ActiveControllers14-lead MLP 2.5 mm × 2.5 mm

IC USB CONTROLLER I2C 14WQFN

FUSB302BVMPX is a USB Type-C controller supporting PD 2.0 protocol, up to 100W power, in 14-lead MLP package, operating temperature -40°C to +105°C, AEC-Q100 Grade 2 qualified.Checked against the datasheet

See alternativesAsk AI FAEDatasheet PDF

All alternatives

View full report

Technical parameters

Datasheet-verified parameters

18 items
ParameterValue and test conditionsSource
Package14-lead MLP 2.5 mm × 2.5 mm, 0.5 mm Pitch
Operating Temperature-40 to 105°C
GradeAEC-Q100 Automotive Qualified Temperature Grade 2
VBUS Supply VoltageMin: 4.0 V, Typ: 5.0 V, Max: 21.0 V
VDD Supply VoltageMin: 2.7 V, Typ: 3.3 V, Max: 5.5 V
VCONN Supply VoltageMin: 2.7 V, Max: 5.5 V
VCONN Supply CurrentMax: 560 mA
VBUS Supply Voltage (Absolute Maximum)Min: -0.5 V, Max: 28.0 V
Supply Voltage from VDD (Absolute Maximum)Min: -0.5 V, Max: 6.0 V
CC pins when configured as Host, Device or Dual Role Port (Absolute Maximum)Min: -0.5 V, Max: 6.0 V
Storage Temperature RangeMin: -65 °C, Max: +150 °C
Maximum Junction TemperatureMax: +150 °C
Lead Temperature (Soldering, 10 Seconds)Max: +260 °C
ESD Human Body ModelMin: 4 kV
ESD Charged Device ModelMin: 1 kV
Low Power Operation CurrentTyp: 25 µA
USB Power Delivery SupportUSB Power Delivery (PD) 2.0, Version 1.2
Maximum Power100 W
All parameters (14)ExpandCollapse
Power
Current - Supply560mA
Voltage - Supply4V ~ 21V
Environment and package
Operating Temperature-40°C~105°C(TA)
PackageTape & Reel (TR); Cut Tape (CT); Digi-Reel®
Package / Case14-WFQFN Exposed Pad
Supplier Device Package14-WQFN (2.5x2.5)
Other
Base Product NumberFUSB302
FunctionController
InterfaceI²C
Mfronsemi
Product StatusActive
ProtocolUSB
SeriesAutomotive, AEC-Q100
StandardsUSB 3.1

Pinout and package

Figure 5. FUSB302BMPX Pin Assi…
Figure 5. FUSB302BMPX Pin Assi…
Package: 14-lead MLP 2.5 mm × 2.5 mm, 0.5 mm Pitch
PinNameFunctionSource
1CC1: Type-C connector Configuration Channel pin, used for attach and orientation detection
2CC2: Type-C connector Configuration Channel pin, used for attach and orientation detection
3GND: Ground
4VBUS: VBUS input pin for attach and detach detection when operating as an upstream facing port (Device)
5VDD: Input supply voltage
6VCONN: Regulated input to be switched to correct CC pin as VCONN to power USB3.1 full-featured cables
7SCL: I2C serial clock signal
8SDA: I2C serial data signal
9INT_N: Active LOW open drain interrupt output

Documents

DatasheetDatasheet · 1.1 MB · 2026-10-29
Open document center

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.