All alternatives

View full report

39 alternatives on file. Sign in to view them.

Technical parameters

Key specs

ProtocolRS-232
Drivers/Receivers1
Data rate250 kbpsMax
Supply voltage3 ~ 5.5 V

Datasheet-verified parameters

18 items
ParameterValue and test conditionsSource
ProtocolRS-232 (Meets or exceeds TIA/EIA-232-F and ITU V.28)
Drivers / ReceiversOne driver and one receiver
Data RateUp to 250 kbps
Supply Voltage3-V to 5.5-V VCC supply
PackageTSSOP (PW) (32), 16 Pins, 5.00 mm × 4.40 mm
Operating Temperature0 to 70 °C
GradeCommercial (C)
RoHSYes
Recommended Operating ConditionsVCC: 3 V (Min) to 3.6 V (Max) for 3.3 V nominal; 4.5 V (Min) to 5.5 V (Max) for 5 V nominal; TA: 0 °C to 70 °C
Absolute Maximum RatingsVCC to GND: -0.3 V to 6 V; RIN to GND: ±25 V; DOUT to GND: ±13.2 V; TJ: 150 °C; Tstg: -65 °C to 150 °C
ESD Protection±15 kV (HBM) on Pins 8, 13; ±3 kV (HBM) on other pins; ±1.5 kV (CDM)
Quiescent Current1 μA (Typ) in automatic power-down mode; 1 mA (Typ) in normal operation (No load, VCC=3.3V to 5V)
Driver High-Level Output Voltage5 V (Min), 5.4 V (Typ) at RL=3 kΩ to GND, DIN=GND
Driver Low-Level Output Voltage-5 V (Min), -5.4 V (Typ) at RL=3 kΩ to GND, DIN=VCC
Short-Circuit Output Current±35 mA (Typ), ±60 mA (Max) at VCC=3.6 V or 5.5 V, VO=0 V
External Capacitors4 × 0.1 μF (for 3.3 V supply); C1=0.047 μF, C2-C4=0.33 μF (for 5 V supply)
Thermal Resistance (Junction-to-Ambient)110.9 °C/W (PW Package)
Pin Count16
All parameters (16)ExpandCollapse
Power
Voltage - Supply3V ~ 5.5V
Environment and package
Mounting TypeSurface Mount
Operating Temperature0°C~70°C
PackageTape & Reel (TR); Cut Tape (CT); Digi-Reel®
Package / Case16-TSSOP (0.173", 4.40mm Width)
Supplier Device Package16-TSSOP
Other
Base Product NumberMAX3221
Data Rate250kbps
DuplexFull
MfrTexas Instruments
Number of Drivers/Receivers1/1
Product StatusActive
ProtocolRS232
Receiver Hysteresis500 mV
Series-
TypeTransceiver

Pinout and package

Figure 5-1. DB or PW Package, …
Figure 5-1. DB or PW Package, …
Package: TSSOP (PW) (32), 16 Pins, 5.00 mm × 4.40 mm
PinNameFunctionSource
1EN(Receiver Enable, Active Low)
2C1+(Charge-pump capacitor positive terminal)
3V+(Positive supply generated by charge pump)
4C1-(Charge-pump capacitor negative terminal)
5C2+(Charge-pump capacitor positive terminal)
6C2-(Charge-pump capacitor negative terminal)
7V-(Negative supply generated by charge pump)
8RIN(RS-232 receiver input)
9ROUT(Receiver output)
10INVALID(Invalid signal indicator, Active Low)
11DIN(Driver input)
12FORCEON(Automatic power-down control input)
13DOUT(RS-232 driver output)
14GND(Ground)
15VCC(Supply voltage)
16FORCEOFF(Automatic power-down control input)

Documents

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.