Hartmann Codier GmbH
All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Operating voltage | ≤ 42.0 V |
| Standby current | ≤ 0.4 A |
| Test voltage | 250.0 V 50 Hz / 1.0 min |
| AC and DC characteristics | |
| Frequency range | 10 Hz ... 500 Hz ... 10 Hz, sliding |
| Environment and package | |
| Height | 7.7 mm |
| Perm. ambient temperature | -50 °C ... +125 °C |
| Perm. storage temperature | -55 °C ... +135 °C |
| Other | |
| Acceleration | 10.0 g |
| Amplitude | 6.0 mm |
| Contact load, dynamic | ≤ 0.1 A |
| Contact resistance | < 80.0 mΩ |
| Degree of protection | comparable IP67 |
| Directions | 6 (±x, ±y, ±z) 3 times each |
| Duration of nominal shock | 11.0 ms |
| Fixation mode | THR |
| Humidity | 21 days at 40 °C, 93 %RH |
| Insulation resistance | > 100.0 MΩ |
| Iron soldering | 4 s / 350 °C |
| Length | 5.24 mm |
| Mechanical lifetime | 25.000 steps |
| Minimum load | 1.0 µA 20.0 mVDC |
| Outside diameter plated land | 1.8 mm |
| Pin connection | 3+3 |
| Positions per rotation | 10 | 16 - more versions on request |
| Reflow soldering | JEDEC J-STD-020 E |
| Sealing | O-Ring |
| Shock acceleration amplitude | 50.0 g |
| Shock testing | acc. IEC 68-2-27 |
| Sinus-vibration testing | acc. IEC 68-2-6 |
| THR PCB hole diameter | 0.8 mm |
| THR through holes | plated through |
| Torque | 1.2 ± 0.2 Ncm |
| Type | vertical |
| Wave soldering | Double Wave acc. DIN EN 61760-1:2006 |
| Width | 7.4 mm |