Figure 1. Pin connection
STMicroelectronicsSwitzerland
IC TRANSCEIVER FULL 2/2 16TSSOP
ST3232EBTR is a 3V powered EIA/TIA-232 and V.28/V.24 communication interface chip with 2 drivers and 2 receivers, supporting 250 kbps data rate, featuring ±15 kV ESD protection, in TSSOP16 package, with an operating temperature range of -40 to 85°C.Checked against the datasheet
All alternatives
View full report120 alternatives on file. Sign in to view them.
Technical parameters
Key specs
ProtocolRS-232
Drivers/Receivers2
Data rate250 kbpsMin · RL=3 kΩ,CL2=1000 pF
Supply voltage3 ~ 5.5 V
Datasheet-verified parameters
17 items| Parameter | Value and test conditions | Source |
|---|---|---|
| Protocol | EIA/TIA-232, V.28/V.24 | |
| Drivers / Receivers | 2 drivers, 2 receivers | |
| Data rate | 250 kbps (Min), RL=3 kΩ, CL2=1000 pF, one transmitter switching | |
| Supply voltage | 3 to 5.5 V (Recommended), -0.3 to 6 V (Absolute Max) | |
| Package | TSSOP16 (tape and reel) | |
| Operating temperature | -40 to 85 °C |
All parameters (16)
| Power | |
|---|---|
| Voltage - Supply | 3V ~ 5.5V |
| Environment and package | |
| Mounting Type | Surface Mount |
| Operating Temperature | -40°C~85°C |
| Package | Tape & Reel (TR); Cut Tape (CT); Digi-Reel® |
| Package / Case | 16-TSSOP (0.173", 4.40mm Width) |
| Supplier Device Package | 16-TSSOP |
| Other | |
| Base Product Number | ST3232 |
| Data Rate | 250kbps |
| Duplex | Full |
| Mfr | STMicroelectronics |
| Number of Drivers/Receivers | 2/2 |
| Product Status | Active |
| Protocol | RS232 |
| Receiver Hysteresis | 500 mV |
| Series | - |
| Type | Transceiver |
Pinout and package
Figure 1. Pin connection
| Pin | Name | Function | Source |
|---|---|---|---|
| c1+ | Positive terminal for the first charge pump capacitor | ||
| c1- | Negative Terminal for the first charge pump capacitor | ||
| c2+ | Positive terminal for the second charge pump capacitor | ||
| c2- | Negative terminal for the second charge pump capacitor | ||
| gnd | Ground | ||
| r1in | First receiver input voltage | ||
| r1out | First receiver output voltage | ||
| r2in | Second receiver input voltage | ||
| r2out | Second receiver output voltage | ||
| t1in | First transmitter input voltage | ||
| t1out | First transmitter output voltage | ||
| t2in | Second transmitter input voltage | ||
| t2out | Second transmitter output voltage | ||
| v+ | Doubled voltage terminal | ||
| v- | Inverted voltage terminal | ||
| vcc | Supply voltage |
Documents
Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.