Takex America Inc.Japan
SWD55
ActiveTAKEX Product Information: Photo Sensors for Steel and Heavy Industries series published on the official product catalog.
All alternatives
View full reportTechnical parameters
| Power | |
|---|---|
| Power consumption | 20W or less |
| Power supply | 100 - 110 VAC or 200 - 220 VAC (Rated voltage : +10% - 15%, 50/60 Hz) |
| Environment and package | |
| Ambient temperature | -10°C to 55 °C (Non-freezing/ non-condensing) |
| Other | |
| Connection | Terminal block |
| Description | Controller |
| Dielectric withstanding | 1500 VAC for 1 minute (between power supply/output and case) 1500 VAC for 1 minute (between power supply and output) |
| Insulation resistance | 500 VDC, 20 MΩ or higher (between power supply/output and case) 500 VDC, 20 MΩ or higher (between power supply and output) |
| Model | Type |
| Operation | Operation |
| Operation mode | Light ON |
| Output mode | Relay output 1c and NPN open collector output |
| Output rating | Relay output : 250 VAC 5 A or less (resistive load) NPN open collector output : Sink current 75 mA 30VDC or less |
| Protective structure | IP40 (with case) |
| Response time | 25ms or less |
| SWD55L SWD55R | For single hole detection |
| Type | For single hole detection |
| Weight | Approx. 8.7 ㎏ |
Documents
No documents are linked to this part yet.