TLC272CPWR

ActiveInstrumentation, OP Amps, Buffer AmpsTSSOP

IC CMOS 2 CIRCUIT 8TSSOP

TLC272CPWR is a precision dual operational amplifier with C-grade accuracy in TSSOP-8 package, operating from 0°C to 70°C, supporting 3V to 16V single-supply, featuring high input impedance and low noise.Checked against the datasheet

See alternatives Ask AI FAEDatasheet PDF

All alternatives

View full report

6 alternatives on file. Sign in to view them.

Technical parameters

Key specs

Supply voltage3 ~ 16 V

Gain bandwidth product2.2 MHzTyp

Input offset voltage120 µVTyp · VDD=5V，VO=1.4V，RS=50Ω，VIC=0，RL=10kΩ)

Quiescent current1.12 mATyp · VDD=5V，VO=2.5V，VIC=2.5V)

Channels2

Datasheet-verified parameters

22 items

Parameter	Value and test conditions	Source
Supply voltage range	3V to 16V (C-suffix, 0°C to 70°C)
Input offset voltage	Typ 0.12mV, Max 10mV (TLC272C, 25°C, VDD=5V, VO=1.4V, RS=50Ω, VIC=0, RL=10kΩ)
Supply current (two amplifiers)	Typ 1.12mA, Max 3.2mA (25°C, VDD=5V, VO=2.5V, No load, VIC=2.5V)
Channels	2
Package	TSSOP (PW), 8 pins, 3mm × 6.4mm
Operating free-air temperature	0°C to 70°C (C-suffix)
RoHS	Yes
Input bias current	Typ 10pA, Max 60pA (25°C, VDD=5V, VO=2.5V, VIC=2.5V)
Common-mode rejection ratio	Min 65dB, Typ 80dB (25°C, VDD=5V, VIC=-0.1V to 3V)
Supply-voltage rejection ratio	Min 65dB, Typ 120dB (25°C, VDD=5V to 10V, VO=1.4V)
Large-signal differential voltage amplification	Min 5V/mV, Typ 1000V/mV (25°C, VDD=5V, VO=0.25V to 2V, RL=10kΩ)
High-level output voltage	Min 3.2V, Typ 4.95V (25°C, VDD=5V, VID=100mV, RL=10kΩ)
Low-level output voltage	Typ 0mV, Max 50mV (25°C, VDD=5V, VID=-100mV, IOL=0)
Common-mode input voltage range	Min -0.1V to 4V, Typ -0.3V to 4.2V (25°C, VDD=5V)
Temperature coefficient of input offset voltage	Typ 0.3μV/°C (25°C to 70°C)
Input impedance	> 10^12 Ω typical
Noise	Typ 10.8nV/√Hz at f = 1kHz
ESD-protection circuitry	Included
Latch-up immunity	Designed-in
Recommended Operating Conditions - Supply voltage	Min 3V, Max 16V (C-suffix)
Recommended Operating Conditions - Common-mode input voltage	Min -0.2V, Max 3.5V (VDD=5V, C-suffix)
Recommended Operating Conditions - Operating free-air temperature	Min 0°C, Max 70°C (C-suffix)

All parameters (20)ExpandCollapse

Power
Current - Input Bias	0.7 pA
Current - Output / Channel	30 mA
Current - Supply	1.9mA (x2 Channels)
Voltage - Supply Span (Max)	16 V
Voltage - Supply Span (Min)	3 V
AC and DC characteristics
Gain Bandwidth Product	2.2 MHz
Slew Rate	5.3V/µs
Voltage - Input Offset	1.1 mV
Environment and package
Mounting Type	Surface Mount
Operating Temperature	0°C~70°C(TA)
Package	Tape & Reel (TR); Cut Tape (CT); Digi-Reel®
Package / Case	8-TSSOP (0.173", 4.40mm Width)
Supplier Device Package	8-TSSOP
Other
Amplifier Type	CMOS
Base Product Number	TLC272
Mfr	Texas Instruments
Number of Circuits	2
Output Type	-
Product Status	Active
Series	LinCMOS™

Pinout and package

Figure 3-1. D, JG, P, or PW Pa… — Package: **TSSOP (PW), 8 pins, 3mm × 6.4mm**

Pin	Name	Function
1	1OUT	(Output 1)
2	1IN-	(Inverting Input 1)
3	1IN+	(Non-inverting Input 1)
4	GND	(Ground)
5	2IN+	(Non-inverting Input 2)
6	2IN-	(Inverting Input 2)
7	2OUT	(Output 2)
8	VDD	(Positive Supply)

Documents

DatasheetDatasheet · 1.9 MB · 2026-11-02

Open document center

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.