Figure 4-3. TLE2062, TLE2062A,…

TLE2062IP

Instrumentation, OP Amps, Buffer AmpsPDIP

IC OPAMP JFET 2 CIRCUIT 8DIP

TLE2062IP is a dual-channel FET-input operational amplifier with a supply voltage range of ±3.5V to ±18V, industrial temperature range of -40°C to 85°C, in an 8-pin PDIP package, featuring 1.1MHz GBW and low quiescent current.Checked against the datasheet

See alternatives Ask AI FAEDatasheet PDF

All alternatives

View full report

Technical parameters

Key specs

Supply voltage3.5 ~ 18 V

Gain bandwidth product1.1 MHzTyp

Input offset voltage100 µVTyp · VIC=0，RS=50Ω，VCC±=±15V)

Quiescent current120 µATyp · VO=0，VCC±=±5V)

Channels2

Datasheet-verified parameters

22 items

Parameter	Value and test conditions	Source
Supply voltage	Min: ±3.5 V, Max: ±18 V (I suffix)
Gain-bandwidth product	1.1 MHz
Input offset voltage	Typ: 0.1 mV, Max: 4 mV (25°C, VIC=0, RS=50Ω, VCC±=±15V)
Supply current	Typ: 120 μA, Max: 325 μA (25°C, VO=0, No load, VCC±=±5V)
Channels	2
Package	PDIP (P), 8 pins
Operating free-air temperature	Min: -40 °C, Max: 85 °C (I suffix)
Grade	Industrial (I suffix)
RoHS	Yes
Absolute Maximum Supply Voltage	Max: 38 V (VCC+ - VCC-)
Recommended Operating Supply Voltage	Min: ±3.5 V, Max: ±18 V (I suffix)
Slew rate	Min: 2.2 V/μs, Typ: 4 V/μs (25°C, RL=10kΩ, CL=100pF, Unity gain)
Common-mode rejection ratio	Min: 65 dB, Typ: 82 dB (25°C, VIC=0, RS=50Ω)
Supply-voltage rejection ratio	Min: 75 dB, Typ: 135 dB (25°C, VCC±=±5V to ±15V, RS=50Ω)
Input bias current	Typ: ±10 pA (25°C, VIC=0, RS=50Ω)
Input offset current	Typ: ±5 pA (25°C, VIC=0, RS=50Ω)
Equivalent input noise voltage	Typ: 43 nV/√Hz (25°C, f=1kHz, RS=20Ω)
Maximum positive peak output voltage swing	Min: 13.2 V, Typ: 14.9 V (25°C, RL=10kΩ, VCC±=±15V)
Common-mode input voltage range	Min: -11 V, Max: 13 V (25°C, VCC±=±15V)
Storage temperature	Min: -65 °C, Max: 150 °C
Input voltage range	Min: VCC-, Max: VCC+
Differential input voltage range	Max: VCC+0.2V

All parameters (20)ExpandCollapse

Power
Current - Input Bias	4 pA
Current - Output / Channel	80 mA
Current - Supply	625µA (x2 Channels)
Voltage - Supply Span (Max)	36 V
Voltage - Supply Span (Min)	7 V
AC and DC characteristics
Gain Bandwidth Product	2 MHz
Slew Rate	3.4V/µs
Voltage - Input Offset	900 µV
Environment and package
Mounting Type	Through Hole
Operating Temperature	-40°C ~ 85°C (TA)
Package / Case	8-DIP (0.300", 7.62mm)
Supplier Device Package	8-PDIP
Other
Amplifier Type	J-FET
Base Product Number	TLE2062
Mfr	Texas Instruments
Number of Circuits	2
Output Type	-
Packaging	Tube
Part Status	Active
Series	-

Pinout and package

Pin	Name	Function
1	IN-	(Inverting Input)
2	IN+	(Non-inverting Input)
3	OUT	(Output)
4	VCC-	(Negative Supply)
5	VCC+	(Positive Supply)
6	OUT	(Output)
7	IN+	(Non-inverting Input)
8	IN-	(Inverting Input)

Documents

DatasheetDatasheet · 3.0 MB · 2026-10-27

Open document center

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.