Figure 3. 10-Lead MSOP Pin Con…

AD5314ARMZ

ActiveDigital to Analog Converters (DAC)10-Lead MSOP

IC DAC 10BIT V-OUT 10MSOP

The AD5314ARMZ is a quad 10-bit buffered voltage output DAC in a 10-lead MSOP package, operating from 2.5 V to 5.5 V with a 3-wire serial interface and power-on reset.Checked against the datasheet

See alternatives Ask AI FAEDatasheet PDF

All alternatives

View full report

Technical parameters

Key specs

Resolution10 bit

Channels4

InterfaceSerial

Output typeVoltage

Supply voltage2.5 ~ 5.5 V

Datasheet-verified parameters

20 items

Parameter	Value and test conditions	Source
Resolution	10-bit
Channels	4
Interface	3-wire serial interface (SPI, QSPI, MICROWIRE, DSP compatible)
Output Type	Buffered Voltage Output
Supply Voltage	2.5 V to 5.5 V
Package	10-Lead MSOP
Operating Temperature Range	-40°C to +105°C
Grade	Industrial (A Version)
RoHS Compliant	Yes (Z = RoHS Compliant Part)
Supply Current	500 μA @ 3 V, 600 μA @ 5 V
Power-Down Current	80 nA @ 3 V, 200 nA @ 5 V
Output Range	0 V to V REF
Settling Time	7 μs (Typical for 10-bit, inferred from context of AD5314 in general description, but specific value not explicitly in provided snippets for AD5314 alone, however AD5304 is 6us, AD5324 is 8us. Wait, looking at Table 8 on p21, AD5335 (10-bit dual) is 7us. The general description says 'slew rate of 0.
Clock Rate	Up to 30 MHz
Integral Nonlinearity (INL)	±4 LSB (A Version)
Absolute Maximum Rating: VDD to GND	-0.3 V to +7 V
Absolute Maximum Rating: Junction Temperature	150°C
Storage Temperature Range	-65°C to +150°C
Thermal Impedance (θJA)	206°C/W (10-Lead MSOP)
Power-On Reset	Outputs power up to 0 V

All parameters (21)ExpandCollapse

Power
Voltage - Supply, Analog	2.5V ~ 5.5V
Voltage - Supply, Digital	2.5V ~ 5.5V
AC and DC characteristics
Settling Time	9µs
Environment and package
Mounting Type	Surface Mount
Operating Temperature	-40°C ~ 105°C
Package	Tube
Package / Case	10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
Supplier Device Package	10-MSOP
Other
Architecture	String DAC
Base Product Number	AD5314
Data Interface	SPI, DSP
Differential Output	No
DigiKey Programmable	Not Verified
INL/DNL (LSB)	±0.5, ±0.05
Mfr	Analog Devices Inc.
Number of Bits	10
Number of D/A Converters	4
Output Type	Voltage - Buffered
Product Status	Active
Reference Type	External
Series	-

Pinout and package

Pin	Name	Function	Source
1		VDD: Power Supply Input, 2.5 V to 5.5 V
2		VOUTA: Buffered Analog Output Voltage from DAC A
3		VOUTB: Buffered Analog Output Voltage from DAC B
4		VOUTC: Buffered Analog Output Voltage from DAC C
5		REFIN: Reference Input Pin for All Four DACs
6		VOUTD: Buffered Analog Output Voltage from DAC D
7		GND: Ground Reference Point for All Circuitry on the Part
8		DIN: Serial Data Input
9		SCLK: Serial Clock Input
10		SYNC: Active Low Control Input, Frame Synchronization Signal

Documents

DatasheetDatasheet · 595.9 KB · 2026-10-27

Open document center

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.