Pin Configuration Figure 4. AD…

ADM707ARZ

ActiveSupervisors8-Lead Standard Small Outline Package [SOIC_N]

IC SUPERVISOR 1 CHANNEL 8SOIC

ADM707ARZ is a precision supply voltage monitor with a 4.65V reset threshold, 200ms reset pulse width, active high/low reset outputs, 8-lead SOIC package, operating temperature -40°C to +85°C, and RoHS compliance.Checked against the datasheet

See alternatives Ask AI FAEDatasheet PDF

All alternatives

View full report

Technical parameters

Key specs

Voltages monitored1

Threshold voltage4.65 V

Reset timeout200 ms

OutputPush-pull

Datasheet-verified parameters

19 items

Parameter	Value and test conditions	Source
Monitors	1 (Supply Voltage Monitor)
Reset Threshold Voltage	4.65 V
Reset Pulse Width	200 ms
Reset Output Type	Active High and Active Low
Package	8-Lead Standard Small Outline Package [SOIC_N] (R-8)
Operating Temperature Range	-40°C to +85°C
Grade	Industrial (Version A)
RoHS	Compliant (Z suffix)
Quiescent Current	190 μA
Minimum Operating Voltage	1 V (Guaranteed RESET valid)
VCC Absolute Maximum Rating	-0.3 V to +6 V
Input Current Absolute Maximum Rating	20 mA (VCC), 20 mA (GND)
Digital Output Current Absolute Maximum Rating	20 mA
Power Dissipation Absolute Maximum Rating (R-8 SOIC)	470 mW
Thermal Impedance (R-8 SOIC)	110°C/W
Storage Temperature Range	-65°C to +150°C
ESD Rating	>4.5 kV
Manual Reset Input Debounce	Debounced TTL/CMOS
Power Fail Detection Threshold	1.25 V

All parameters (16)ExpandCollapse

Power
Number of Voltages Monitored	1
Voltage - Threshold	4.65V
Environment and package
Mounting Type	Surface Mount
Operating Temperature	-40°C ~ 85°C (TA)
Package	Tube
Package / Case	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package	8-SOIC
Other
Base Product Number	ADM707
DigiKey Programmable	Not Verified
Mfr	Analog Devices Inc.
Output	Push-Pull, Push-Pull
Product Status	Active
Reset	Active High/Active Low
Reset Timeout	160ms Minimum
Series	-
Type	Simple Reset/Power-On Reset

Pinout and package

Pin	Name	Function
1	MR	(Manual Reset Input, active low, internally debounced)
2	VCC	(5V Power Supply Input)
3	GND	(0V Ground Reference)
4	PFI	(Power Fail Input, noninverting input)
5	PFO	(Power Fail Output, active low)
6	NC	(No Connect)
7	RESET	(Reset Output, active low)
8	RESET	(Reset Output, active high)

Documents

DatasheetDatasheet · 365.0 KB · 2026-10-29

Open document center

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.