Figure 24. 8-Lead Plastic Dual…

ADM708TARZ

ActiveSupervisors8-Lead Small Outline Package [SOIC_N]

IC SUPERVISOR 1 CHANNEL 8SOIC

ADM708TARZ is a 3.08V threshold voltage monitor with dual reset outputs (active high/low) and power-fail detection, no watchdog timer, in 8-lead SOIC package, industrial temperature range -40°C to +85°C, RoHS compliant.Checked against the datasheet

See alternatives Ask AI FAEDatasheet PDF

All alternatives

View full report

Technical parameters

Key specs

Voltages monitored1

Threshold voltage3.08 V

Reset timeout200 ms

OutputPush-pull

Datasheet-verified parameters

18 items

Parameter	Value and test conditions	Source
Monitors	1 (Supply Voltage Monitor) + 1 (Power Fail Detector)
Threshold Voltage	3.08 V (ADM708T)
Reset Timeout	200 ms reset pulse width
Output Type	Both active high and active low (RESET and RESET)
Package	8-Lead Small Outline Package [SOIC_N] (R-8)
Operating Temperature	-40°C to +85°C
Grade	Industrial (Version A)
RoHS	RoHS Compliant Part (Z suffix)
Quiescent Current	100 µA
Supply Voltage Range	Guaranteed RESET valid with VCC = 1 V; Absolute Max VCC -0.3 V to +6 V
Power Fail Threshold	1.25 V
Manual Reset Input	Debounced, Active Low, Internal 70 µA pull-up
Watchdog Timer	Not Available (ADM708 series)
Absolute Maximum Rating - VCC	-0.3 V to +6 V
Absolute Maximum Rating - Input Current	VCC: 20 mA, GND: 20 mA, Digital Output: 20 mA
Power Dissipation - SOIC	470 mW (θJA = 110°C/W)
Storage Temperature	-65°C to +150°C
ESD Rating	>4.5 kV

All parameters (16)ExpandCollapse

Power
Number of Voltages Monitored	1
Voltage - Threshold	3.08V
Environment and package
Mounting Type	Surface Mount
Operating Temperature	-40°C ~ 85°C (TA)
Package	Tube
Package / Case	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package	8-SOIC
Other
Base Product Number	ADM708
DigiKey Programmable	Not Verified
Mfr	Analog Devices Inc.
Output	Push-Pull, Push-Pull
Product Status	Active
Reset	Active High/Active Low
Reset Timeout	160ms Minimum
Series	-
Type	Simple Reset/Power-On Reset

Pinout and package

Package8-Lead Small Outline Package [SOIC_N] (R-8)

Pin	Name	Function
1	MR	(Manual Reset Input, Active Low, Internally Debounced)
2	VCC	(Power Supply Input)
3	GND	(Ground)
4	PFI	(Power Fail Input, Noninverting Input)
5	PFO	(Power Fail Output, Active Low)
6	NC	(No Connect)
7	RESET	(Reset Output, Active Low)
8	RESET	(Reset Output, Active High)

Documents

DatasheetDatasheet · 360.8 KB · 2026-10-29

Open document center

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.