Analog Devices Inc.United States
IC REG LINEAR 3.3V 500MA 8MSOP
The ADP3335ARMZ-3.3RL7 is a high-accuracy, low dropout linear regulator with a 3.3V output, 500mA max current, in an 8-lead MSOP package, operating from -40°C to +85°C, featuring anyCAP stability and thermal protection.Checked against the datasheet
All alternatives
View full reportTechnical parameters
Key specs
Output voltage3.3 V
Output current500 mAMax
Input voltage2.6 ~ 12 V
Dropout voltage370 mVMax · Max 370 mV (at IL=500 mA)
Quiescent current80 µATyp · Max 110 μA (at IL=0.1 mA)
Datasheet-verified parameters
21 items| Parameter | Value and test conditions | Source |
|---|---|---|
| Output Voltage | 3.3 V | |
| Output Current | 500 mA (continuous) | |
| Input Voltage Range | 2.6 V to 12 V | |
| Dropout Voltage | Typ 200 mV, Max 370 mV (at IL=500 mA) | |
| Quiescent Current | Typ 80 µA, Max 110 µA (at IL=0.1 mA) | |
| Package | 8-Lead MSOP |
All parameters (22)
| Power | |
|---|---|
| Current - Output | 500mA |
| Current - Quiescent (Iq) | 110 µA |
| Current - Supply (Max) | 10 mA |
| Voltage Dropout (Max) | 0.37V @ 500mA |
| Voltage - Input (Max) | 12V |
| Voltage - Output (Max) | - |
| Voltage - Output (Min/Fixed) | 3.3V |
| AC and DC characteristics | |
| PSRR | - |
| Environment and package | |
| Mounting Type | Surface Mount |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Package | Tape & Reel (TR) Cut Tape (CT) Digi-Reel® |
| Package / Case | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) |
| Supplier Device Package | 8-MSOP |
| Other | |
| Base Product Number | ADP3335 |
| Control Features | Shutdown |
| Mfr | Analog Devices Inc. |
| Number of Regulators | 1 |
| Output Configuration | Positive |
| Output Type | Fixed |
| Product Status | Active |
| Protection Features | Over Current, Over Temperature |
| Series | anyCAP® |
Pinout and package
Figure 3. 8-Lead MSOP
| Pin | Name | Function | Source |
|---|---|---|---|
| 4 | GND: Ground Pin. | ||
| 5 | NR: Noise Reduction Pin. Used for further reduction of output noise. | ||
| 6 | SD: Active Low Shutdown Pin. Connect to ground to disable the regulator output. When shutdown is not used, this pin should be connected to the input pin. | ||
| 1, 2, 3 | OUT: Output of the Regulator. Bypass to ground with a 1.0 μF or larger capacitor. All pins must be connected together for proper operation. | ||
| 7, 8 | IN: Regulator Input. All pins must be connected together for proper operation. |
Documents
Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.