HMC677LP5E
Analog Devices Inc.United States

HMC677LP5E

ObsoleteRF Misc ICs and Modules32-Lead LCC

IC LEVEL SHIFTER 6-BIT 32-QFN

HMC677LP5E is a 6-bit serial/parallel switch driver/controller using BiCMOS technology, supporting TTL/CMOS logic with complementary outputs, operating temperature -40 to +85°C, in a 32-pin LCC package.Checked against the datasheet

See alternativesAsk AI FAEDatasheet PDF

All alternatives

View full report

Technical parameters

Datasheet-verified parameters

24 items
ParameterValue and test conditionsSource
Package32-Lead LCC (Low Stress Injection Molded Plastic)
Operating Temperature-40 to +85 °C
RoHSRoHS-compliant
Positive DC Supply Voltage (Vdd)Min: 4.5 V, Typ: 5.0 V, Max: 5.5 V
Negative DC Supply Voltage (Vee)Min: -5.5 V, Typ: -5.0 V, Max: -4.5 V
Output High Voltage (Voh)Min: Voph - 0.1 V (Ioh = 1 mA, Vee = -4.5V)
Output Low Voltage (Vol)Max: Vee + 0.1 V (Iol = 2 mA, Vee = -4.5V)
Input High Voltage (Vih)Min: 2.0 V
Input Low Voltage (Vil)Max: 0.8 V
Input Leakage Current (lin)Max: 1 μA (Vin = Vdd or GND, Vdd = Max)
Quiescent Supply Current (Idd)Max: 1.5 mA (Vdd = Max, Vin = Vdd or GND)
Propagation Delay (tplh)Max: 80 nS
Maximum Serial Bit RateMax: 10 Mbps
Maximum I/O Update RateMax: 100 ns
Absolute Maximum Ratings - Digital Inputs Voltage-0.5 to Vdd +0.5V
Absolute Maximum Ratings - Bias Voltage (Vdd)5.6 V
Absolute Maximum Ratings - Bias Voltage (Vee)-5.6 V
Absolute Maximum Ratings - Bias Voltage (Voph)2.3 V
Absolute Maximum Ratings - Channel Temperature125 °C
Absolute Maximum Ratings - Continuous Pdiss325 mW (T = 85 °C, derate 8.2 mW/°C above 85 °C)
Absolute Maximum Ratings - Thermal Resistance123 °C/W (Channel to ground paddle)
Storage Temperature-65 to +150 °C
Recommended Operating Conditions - Voph0 to 2.2 V
Recommended Operating Conditions - Vdd - VeeMin: 9 V, Typ: 10 V, Max: 11 V
All parameters (12)ExpandCollapse
AC and DC characteristics
Frequency-
Environment and package
Mounting TypeSurface Mount
PackageStrip
Package / Case32-VFQFN Exposed Pad
Supplier Device Package32-QFN (5x5)
Other
Base Product NumberHMC677
FunctionController
MfrAnalog Devices Inc.
Product StatusObsolete
RF TypeGeneral Purpose
Secondary Attributes6-Bit
Series-

Pinout and package

Package32-Lead LCC (Low Stress Injection Molded Plastic)

PinNameFunctionSource
9P/S: Serial/Parallel Select
10CLK: Clock
11SERIN: Serial Data Input
12LE: Latch Enable
27Vee: Negative Supply
28VOPH: User selectable output high voltage 0 to +2.2V
30SEROUT: Serial input data delayed by six clock cycles
1, 29Vdd1, Vdd2: Supply Voltage
15, 17, 19, 21, 23,B0- B5: Complementary Outputs
16, 18, 20, 22, 24,B0B- B5B: Complementary Outputs
2 - 7I0- I5: Parallel Data Input/Control
31, 32PUP2, PUP1: Power-up State Selection
8, 13, 14N/C: No connection necessary. These pins may be connected to DC ground.

Documents

DatasheetDatasheet · 640.2 KB · 2026-10-27
Open document center

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.