DBV Package 5-Pin SOT-23 INA19…

DBV Package 5-Pin SOT-23 INA19…

Texas InstrumentsUnited States

INA196AIDBVR

ActiveCurrent Regulation/ManagementSOT-23

IC CURRENT MONITOR 3% SOT23-5

INA196AIDBVR is a current shunt monitor with 20 V/V gain, -16V to +80V common-mode range, -40°C to +125°C operating temperature, in SOT-23 package.Checked against the datasheet

See alternativesAsk AI FAEDatasheet PDF

All alternatives

View full report

Technical parameters

Datasheet-verified parameters

18 items
ParameterValue and test conditionsSource
PackageSOT-23 (5), 2.90 mm × 1.60 mm
Operating Temperature-40°C to +125°C
Gain20 V/V
Common-Mode Input Range-16 V to +80 V
Supply Voltage2.7 V to 18 V
Quiescent Current900 μA (maximum)
Bandwidth500 kHz (C_LOAD=5 pF)
Common-Mode Rejection80 dB (Min), 94 dB (Typ) at TA=25°C; 100 dB (Typ), 120 dB (Max) over Temp
Offset Voltage, RTI±0.5 mV (Typ), 2 mV (Max) at TA=25°C; 0.5 mV (Typ), 3 mV (Max) over Temp
Gain Error±0.2% (Typ), ±1% (Max) at TA=25°C; ±2% (Max) over Temp
Total Output Error±0.75% (Typ), ±2.2% (Max) at TA=25°C; ±1% (Typ), ±3% (Max) over Temp
Output Impedance1.5 Ω (Typ)
Maximum Capacitive Load10 nF (No Sustained Oscillation)
Absolute Maximum Ratings - Supply Voltage18 V (Max)
Absolute Maximum Ratings - Common-Mode-16 V to 80 V
Absolute Maximum Ratings - Operating Temperature-55°C to 150°C
ESD Protection - HBM±4000 V
ESD Protection - CDM±1000 V
All parameters (14)ExpandCollapse
Power
Current - Output-
Voltage - Input-16V ~ 80V
AC and DC characteristics
Accuracy±3%
Environment and package
Mounting TypeSurface Mount
Operating Temperature-40°C ~ 125°C
PackageTape & Reel (TR) Cut Tape (CT) Digi-Reel®
Package / CaseSC-74A, SOT-753
Supplier Device PackageSOT-23-5
Other
Base Product NumberINA196
FunctionCurrent Monitor
MfrTexas Instruments
Product StatusActive
Sensing MethodHigh-Side
Series-

Pinout and package

DBV Package 5-Pin SOT-23 INA19…
DBV Package 5-Pin SOT-23 INA19…
Package: SOT-23 (5), 2.90 mm × 1.60 mm
PinNameFunctionSource
1OUT, Output voltage
2GND, Ground
3V+, Power supply, 2.7 V to 18 V
4VIN-, Connect to load side of shunt resistor
5VIN+, Connect to supply side of shunt resistor

Documents

DatasheetDatasheet · 891.6 KB · 2026-10-27
Open document center

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.