Figure 4-1. TL071H DBV Package…

TL071HIDBVR

ActiveInstrumentation, OP Amps, Buffer AmpsSOT-23

IC OPAMP CMOS 1 CIRCUIT SOT23-5

The TL071HIDBVR is a single-channel, low-noise FET-input operational amplifier in a 5-pin SOT-23 package. It features a typical offset voltage of 1mV, a slew rate of 20V/μs, an operating temperature range of -40°C to +125°C, and output short-circuit protection.Checked against the datasheet

See alternatives Ask AI FAEDatasheet PDF

All alternatives

View full report

Technical parameters

Key specs

Supply voltage4.5 ~ 40 V

Gain bandwidth product5.25 MHzTyp

Input offset voltage4 mVMax · Max ±1 mV (TA = 25°C)，Max ±4 mV (TA = -40°C to +125°C)

Quiescent current960 µATyp · IO = 0 A，TA = 25°C)

Channels1

Datasheet-verified parameters

23 items

Parameter	Value and test conditions	Source
Supply voltage range	4.5V to 40 V (±2.25 V to ±20 V)
Gain-bandwidth product	Typ 5.25 MHz
Input offset voltage	Max ±1 mV (TA = 25°C), Max ±4 mV (TA = -40°C to +125°C)
Quiescent current	Typ 960 μA, Max 1156 μA (TL071H, IO = 0 A, TA = 25°C)
Channel count	Single
Package	SOT-23 (DBV), 5-Pin
Operating temperature	-40°C to +125°C
Grade	Industrial (I-suffix)
RoHS	Yes
Slew rate	Typ 20 V/μs (VS = 40 V, G = +1, CL = 20 pF)
Input bias current	Max ±1 pA (TA = 25°C), Max ±300 pA (DCK and DBV packages)
Input offset current	Max ±0.5 pA (TA = 25°C), Max ±250 pA (DCK and DBV packages)
Input voltage noise density	Typ 37 nV/√Hz (f = 1 kHz)
Common-mode voltage range	Min (VCC-) + 1.5 V, Max (VCC+)
Common-mode rejection ratio	Min 100 dB (VS = 40 V, TA = 25°C), Min 95 dB (TA = -40°C to +125°C)
Open-loop voltage gain	Min 118 dB (VS = 40 V, TA = -40°C to +125°C)
Short-circuit current	Typ ±26 mA
Capacitive load drive	Typ 300 pF
Total harmonic distortion + noise	Typ 0.00012 % (VS = 40 V, VO = 6 VRMS, G = +1, f = 1 kHz)
ESD protection	1.5 kV (HBM)
Absolute Maximum Ratings: Supply voltage	Min 0 V, Max 42 V (All other devices)
Absolute Maximum Ratings: Operating ambient temperature	Min -55 °C, Max 150 °C
Recommended Operating Conditions: Supply voltage	4.5 V to 40 V (±2.25 V to ±20 V)

All parameters (18)ExpandCollapse

Power
Current - Input Bias	1 pA
Current - Supply	1.4mA
Voltage - Supply Span (Max)	40 V
Voltage - Supply Span (Min)	4.5 V
AC and DC characteristics
Gain Bandwidth Product	5.25 MHz
Slew Rate	20V/µs
Voltage - Input Offset	1 mV
Environment and package
Mounting Type	Surface Mount
Operating Temperature	-40°C ~ 125°C (TA)
Package	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®
Package / Case	SC-74A, SOT-753
Supplier Device Package	SOT-23-5
Other
Amplifier Type	CMOS
Mfr	Texas Instruments
Number of Circuits	1
Output Type	-
Product Status	Active
Series	-

Pinout and package

Pin	Name	Function
1	OUT	(Output)
2	VCC-	(Negative power supply)
3	IN+	(Non-inverting input)
4	VCC+	(Positive power supply)
5	IN-	(Inverting input)

Documents

DatasheetDatasheet · 5.8 MB · 2026-10-29

Open document center

Datasheet-verified content is extracted by AI from the manufacturer datasheet. Click a page number to view the original.