Поиск аналогов электронных компонентов
115366
Pepperl+Fuchs, Inc.Германия

115366

Производится

Inductive sensor

Спросить AI FAE

Все аналоги

Полный отчёт

Технические параметры

Питание
No-load supply currentI 0 | ≤ 20 mA
Off-state currentI r | 0 ... 0.5 mA typ. 0.01 mA
Off-state current T U =40 °C, switching element off≤ 100 µA
Off-state current T U =40 °C, switching element off ≤ 100 µAOff-state current T U =40 °C, switching element off | ≤ 100 µA
Operating currentI L | 0 ... 200 mA
Operating voltageU B | 10 ... 30 V
Operating voltage indicatorLED, green
Voltage dropU d | ≤ 2 V
Voltage drop I L = 100 mA, switching element onU d | 1 ... 2.6 V typ. 1.8 V
Voltage drop I L = 10 mA, switching element onU d | 0.8 ... 2.2 V typ. 1.4 V
Voltage drop I L = 1 mA, switching element onU d | 0.5 ... 2.3 V typ. 0.9 V
Voltage drop I L = 200 mA, switching element onU d | 1.2 ... 2.8 V typ. 2 V
Voltage drop I L = 20 mA, switching element onU d | 0.9 ... 2.3 V typ. 1.5 V
Voltage drop I L = 50 mA, switching element onU d | 0.9 ... 2.5 V typ. 1.6 V
Характеристики по постоянному и переменному току
Switching frequencyf | 0 ... 150 Hz
Time delay before availabilityt v | 80 ms
Условия эксплуатации и корпус
Ambient temperature-25 ... 85 °C (-13 ... 185 °F)
Height40 mm
Height 40 mm Width 40 mm Length 118 mmHeight | 40 mm | Width | 40 mm | Length | 118 mm
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Другое
Actual operating distances r | 27 ... 33 mm typ. 30 mm
Assured operating distances a | 0 ... 24.3 mm
Connection (system side)screw terminals , M20 x 1.5 cable gland , usable thread length 9.1 mm , screw-in depth max. 9.1 mm
Connection typescrew terminals
Core cross sectionup to 2.5 mm 2 , stripped insulation length: 7 mm
Degree of protectionIP68 / IP69K
Diagnostic Coverage (DC)0 %
Equipment protection level Dc (tc)IECEx TUR 21.0020X
Equipment protection level Gc (ec)IECEx TUR 21.0019X
Equipment protection level Gc (ec) IECEx TUR 21.0019X Equipment protection level Dc (tc) IECEx TUR 21.0020XEquipment protection level Gc (ec) | IECEx TUR 21.0019X | Equipment protection level Dc (tc) | IECEx TUR 21.0020X
Equipment protection level Gc (ec) TÜV 20 ATEX 8525 X Equipment protection level Dc (tc) TÜV 20 ATEX 8526 XEquipment protection level Gc (ec) | TÜV 20 ATEX 8525 X | Equipment protection level Dc (tc) | TÜV 20 ATEX 8526 X
Hazardous Location2024322315005962 2024322315005982
Hazardous Location 2024322315005962 2024322315005982Hazardous Location | 2024322315005962 2024322315005982
Housing materialPA
HysteresisH | typ. 5 %
Information for connectionA maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Installationnon-flush
Length118 mm
Marine approvalDNVGL TAA0000160
Mass225 g
Maximum core cross-sectionmax. 2.5 mm 2 (incl. wire-end ferrules when using flexible conductors)
Minimum core cross-sectionmin. 0.5 mm 2 (incl. wire-end ferrules when using flexible conductors)
Mission Time (T M )20 a
MTTF d1362 a
NoteTightening torque: 1.8 Nm (housing)
Output polarityDC
Output typePNP
Rated operating distances n | 30 mm
Reduction factor r 3040.74
Reduction factor r Al0.33
Reduction factor r Brass0.38
Reduction factor r Cu0.31
Reverse polarity protectionreverse polarity protected
Sensing facePA
Short-circuit protectionpulsing
StandardsEN IEC 60947-5-2
Standards EN IEC 60947-5-2Standards | EN IEC 60947-5-2
Switching functionNormally open (NO)
Switching state indicatorLED, yellow
UL approvalcULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA
Use in the hazardous areasee instruction manuals
Width40 mm

Изображения

Документы

К этому компоненту пока не привязаны документы.