Pepperl+Fuchs, Inc.Германия
123794
ПроизводитсяInertial measurement unit for inclination, acceleration and rotation rate measurement in 3-axis each
Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| No-load supply current | I 0 | ≤ 80 mA |
| Operating voltage | U B | 5 ... 30 V DC |
| Power consumption | P 0 | ≤ 0.6 W |
| Характеристики по постоянному и переменному току | |
| Accuracy | ± 0.2 °/s at 25 °C in the measuring range ±45 °/s ± 0.5 °/s at 25 °C in the measuring range ±120 °/s ± 1 °/s at 25 °C in the measuring range ±250 °/s |
| Dynamic accuracy | < 0.5 ° absolute, at 25 °C for inclination range 360 ° |
| Frequency range | 0 ... 30 Hz |
| Noise immunity | EN IEC 61000-6-2:2019 , ISO 7637-2:2011 , ISO 7637-3:2016 , ISO 16750-2:2012 |
| Repeat accuracy | ± 0.1 ° |
| Resolution | 0.01 ° |
| Static accuracy | ± 0.15 ° at 25 °C for inclination range ±45 ° ± 0.2 ° at 25 °C for inclination range ±90 ° ± 0.3 ° at 25 °C for inclination range 360 ° |
| Условия эксплуатации и корпус | |
| Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Height | 37 mm |
| Height 37 mm Width 45 mm Length 65 mm | Height | 37 mm | Width | 45 mm | Length | 65 mm |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Temperature influence | ± 0.015 ° / K |
| Другое | |
| Climatic testing | EN IEC 60068-2-38 , cyclic 12h + 12h, 94% humidity EN 60068-2-14 , test Na, -50 ... +85 °C, 10 cycles |
| Compensation range | 4 |
| Connection type | 5-pin, M12 x 1 connector 5-pin, M12 x 1 socket internal bridged |
| Cycle time | 10 ... 655350 ms , programmable |
| Degree of protection | IP68 / IP69 |
| Diagnostic Coverage (DC) | 0 % |
| E1 Type approval | 10R-06 |
| Emitted interference | EN IEC 61000-6-4:2019 , EN 55011:2016+A1:2017+A11:2020 |
| Error indicator | LED, red |
| Housing material | PA |
| Interface type | CANopen |
| Length | 65 mm |
| Linearity | ± 0,5% of the measured value, up to ±1 g for -40 ... +85 °C |
| Mass | 265 g |
| Measuring range | 0 ... 360 ° |
| Measuring technology | MEMS |
| Mission Time (T M ) | 10 a |
| MTTF d | 628 a |
| Node ID | 0 ... 126 , programmable |
| Operation indicator | LED, yellow |
| Salt spray test | IEC 60068-2-52 , cyclic |
| Shock resistance | EN 60068-2-27, 100 g, 6 ms |
| Status indicator | LED, green |
| Termination | external |
| Transfer rate | 125 ... 1000 kBit/s , programmable |
| Type | Inertial measurement unit 3-axis |
| UL approval | E87056 , cULus Listed, General Purpose, Class 2 Power Source, Type 1 enclosure , if UL marking is marked on the product. For use in NFPA 79 Applications only. adapters providing field wiring on request |
| Vibration resistance | EN 60068-2-6, 20 g, 10 ... 2000 Hz |
| Width | 45 mm |
Изображения
Документы
К этому компоненту пока не привязаны документы.