Поиск аналогов электронных компонентов
129174
Pepperl+Fuchs, Inc.Германия

129174

Производится

SMART Transmitter Power Supply/SMART Current Driver

Подобрать аналогСпросить AI FAE

Все аналоги

Полный отчёт

Технические параметры

Питание
Available voltagemin. 15 V at 20 mA min. 18 V at 4 mA
Control/power supplybasic insulation according to IEC/EN 61010-1, rated insulation voltage 300 V eff
Field circuit/power supplyreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V eff
Input voltageVoltage across terminals 10 ... 30 V. If the current is supplied from a source > 24 V, series resistance of ≥ (V - 24)/0.02 Ω is needed, where V is the source voltage. The maximum value of the resistance is (V - 10)/0.02 Ω. (sink output)
Number of channels2
Power consumptionmax. 2.1 W
Power dissipationmax. 1.4 W
Rated currentI r | max. 88 mA at 24 V
Rated voltageU r | 19 ... 30 V DC
Voltagemin. 13 V at 20 mA
Voltage dropmax. 6 V
Характеристики по постоянному и переменному току
Frequency rangefield side into the control side: bandwidth with 0.5 V pp signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 0.5 V pp signal 0 ... 3 kHz (-3 dB)
Ripplemax. 10 %
Rise time/fall timemax. 100 ms (10 ... 90 %)
Settling timemax. 200 ms
Условия эксплуатации и корпус
Ambient temperature-40 ... 70 °C (-40 ... 158 °F)
Dimensions12.5 x 124 x 114 mm (0.5 x 4.9 x 4.5 inch) (W x H x D) , housing type A2
Height124 mm
Height 124 mm Width 12.5 mm Depth 114 mmHeight | 124 mm | Width | 12.5 mm | Depth | 114 mm
Influence of ambient temperature< 2 µA/K (-40 ... 70 °C (-40 ... 158 °F))
Influence of ambient temperature < 2 µA/K (-40 ... 70 °C (-40 ... 158 °F))Influence of ambient temperature | < 2 µA/K (-40 ... 70 °C (-40 ... 158 °F))
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
Другое
Configurationvia DIP switches
ConnectionPower Rail or terminals 9+, 10-
Control circuitterminals 5-, 6+; 7-, 8+
Control circuit/control circuitfunctional isolation, rated voltage: 50 V
Degree of protectionIEC 60529:2001
Depth114 mm
Deviationmax. 20 µA incl. calibration, linearity, hysteresis, loads and fluctuations of supply voltage
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)Directive 2014/30/EU | EN 61326-1:2013 (industrial locations)
Display elementsLED
Electromagnetic compatibilityNE 21:2017 EN 61326-3-2:2018
Factory settinganalog input with source output
Field circuitterminals 1+, 2-, 3+, 4-
Field circuit/control circuitbasic insulation according to IEC/EN 61010-1, rated insulation voltage 300 V eff
Labelingspace for labeling at the front
Line fault detection> 100 kΩ at max. 30 V, with field wiring open
Loadmax. 350 Ω (source output)
Massapprox. 115 g
Safety Integrity Level (SIL)SIL 2
Signal0/4 ... 20 mA , limited to approx. 30 mA
Signal typeAnalog input/analog output
Suitable field devices2-wire SMART transmitters
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Systematic capability (SC)SC 3
Width12.5 mm

Изображения

Документы

К этому компоненту пока не привязаны документы.