Поиск аналогов электронных компонентов
1329
Pepperl+Fuchs, Inc.Германия

1329

Производится

Inductive sensor

Спросить AI FAE

Все аналоги

Полный отчёт

Технические параметры

Питание
No-load supply currentI 0 | ≤ 10 mA
Off-state currentI r | 0 ... 0.5 mA typ. 0.01 mA
Off-state current T U =40 °C, switching element off≤ 100 µA
Off-state current T U =40 °C, switching element off ≤ 100 µAOff-state current T U =40 °C, switching element off | ≤ 100 µA
Operating currentI L | 0 ... 200 mA
Operating voltageU B | 10 ... 60 V
Operating voltage indicatorLED, green
Voltage dropU d | ≤ 2.8 V
Voltage drop I L = 100 mA, switching element onU d | 1 ... 2.6 V typ. 1.8 V
Voltage drop I L = 10 mA, switching element onU d | 0.8 ... 2.2 V typ. 1.4 V
Voltage drop I L = 1 mA, switching element onU d | 0.5 ... 2.3 V typ. 0.9 V
Voltage drop I L = 200 mA, switching element onU d | 1.2 ... 2.8 V typ. 2 V
Voltage drop I L = 20 mA, switching element onU d | 0.9 ... 2.3 V typ. 1.5 V
Voltage drop I L = 50 mA, switching element onU d | 0.9 ... 2.5 V typ. 1.6 V
Характеристики по постоянному и переменному току
Switching frequencyf | 0 ... 100 Hz
Time delay before availabilityt v | ≤ 100 ms
Условия эксплуатации и корпус
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Height55 mm
Height 55 mm Width 55 mm Length 128 mmHeight | 55 mm | Width | 55 mm | Length | 128 mm
Storage temperature-25 ... 85 °C (-13 ... 185 °F)
Другое
Actual operating distances r | 36 ... 44 mm typ. 40 mm
Assured operating distances a | 0 ... 32.4 mm
CCC approvalCertified by China Compulsory Certification (CCC)
Connection typescrew terminals
Core cross sectionup to 2.5 mm 2
Degree of protectionIP68
Housing materialPBT
HysteresisH | 1 ... 10 % typ. 5 %
Information for connectionA maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Installationnon-flush
Length128 mm
Maximum core cross-sectionwithout wire end ferrules 2.5 mm 2 , with connector sleeves 1.5 mm 2
Minimum core cross-sectionwithout wire end ferrules 0.5 mm 2 , with connector sleeves 0.34 mm 2
Output polarityDC
Output typePNP
Rated operating distances n | 40 mm
Reduction factor r 3040.8
Reduction factor r Al0.5
Reduction factor r Cu0.45
Reverse polarity protectionreverse polarity protected
Sensing facePBT
Short-circuit protectionpulsing
StandardsEN IEC 60947-5-2
Standards EN IEC 60947-5-2Standards | EN IEC 60947-5-2
Switching functionNormally open (NO)
Switching state indicatorLED, yellow
UL approvalcULus Listed Load Type: Resistive Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 60 V DC Output Switching Current: 200 mA
Width55 mm

Изображения

Документы

К этому компоненту пока не привязаны документы.