Pepperl+Fuchs, Inc.Германия
29449
ПроизводитсяRetroreflective sensor with polarization filter, plastic housing, 9 m detection range, red light, dark on, DC version, 2 push-pull outputs, no control elements, M12 plug
Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| No-load supply current | I 0 | ≤ 20 mA |
| Operating voltage | U B | 10 ... 30 V DC |
| Switching current | max. 100 mA |
| Switching voltage | max. 30 V DC |
| Voltage drop | U d | ≤ 1.5 V |
| Характеристики по постоянному и переменному току | |
| Ripple | 10 % |
| Switching frequency | f | ≤ 500 Hz |
| Условия эксплуатации и корпус | |
| Ambient temperature | -30 ... 55 °C (-22 ... 131 °F) |
| Height | 62 mm |
| Height 62 mm Width 18 mm Depth 35 mm | Height | 62 mm | Width | 18 mm | Depth | 35 mm |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Другое | |
| Ambient light limit | 50000 Lux ; according to EN 60947-5-2 |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection | 4-pin, M12 x 1 connector |
| Degree of protection | IP67 |
| Depth | 35 mm |
| Diagnostic Coverage (DC) | 0 % |
| Diameter of the light spot | approx. 200 mm at a distance of 6 m |
| Effective detection range | 0 ... 9000 mm |
| Function indicator | LED yellow: 1. LED lit constantly: signal > 2 x switching point (operating reserve) 2. LED flashes: signal between 1 x switching point and 2 x switching point 3. LED off: signal < switching point |
| Housing | plastic |
| Housing plastic Optical face PMMA | Housing | plastic | Optical face | PMMA |
| Light source | LED |
| Light type | modulated visible red light , 630 nm |
| Mass | 24 g |
| Mission Time (T M ) | 20 a |
| MTTF d | 920 a |
| Opening angle | 3 ° |
| Operation indicator | LED green: power on |
| Optical face | PMMA |
| Polarization filter | yes |
| Product standard | EN 60947-5-2 |
| Protection class | II , rated insulation voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 Output circuit basis insulation of input circuit according to EN 50178, rated insulation voltage 240 V AC |
| Reference target | reflector C110-2 |
| Reflector distance | 20 ... 9000 mm |
| Response time | ≤ 1 ms |
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected |
| Switching type | dark-on |
| Threshold detection range | 12 m |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure |
| Width | 18 mm |
Изображения
Документы
К этому компоненту пока не привязаны документы.