30919

Производится

Inductive positioning system

Все аналоги

Технические параметры

Питание
No-load supply current	I 0 \| ≤ 40 mA
Operating current	I L \| ≤ 100 mA
Operating voltage	U B \| 18 ... 30 V DC
Operating voltage indicator	LED green
Voltage drop	≤ 3 V
Характеристики по постоянному и переменному току
Repeat accuracy	R \| ± 0.1 mm
Resolution	125 µm
Условия эксплуатации и корпус
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Height	41 mm
Height 41 mm Width 23 mm Length 126 mm	Height \| 41 mm \| Width \| 23 mm \| Length \| 126 mm
Temperature drift	± 0.5 mm (-25 °C ... 70 °C)
Другое
CCC approval	CCC approval / marking not required for products rated ≤36 V
Connection type	5-pin, M12 x 1 connector
Degree of protection	IP67
Diagnostic Coverage (DC)	0 %
Housing	ABS
Housing ABS Target mild steel, e. g. 1.0037, SR235JR (formerly St37-2)	Housing \| ABS \| Target \| mild steel, e. g. 1.0037, SR235JR (formerly St37-2)
Length	126 mm
Linearity error	within measuring range: ± 0.8 mm within linearity range: ± 0.4 mm
Linearity range	1 ... 103 mm
Load resistor	≤ 400 Ω
Measuring range	0 ... 104 mm
Mission Time (T M )	20 a
MTTF d	280 a
Object distance	0.5 ... 3 mm , recommended: 2 mm
Output type	2 switch outputs PNP, NO , reverse polarity protected , short-circuit protected
Reverse polarity protection	reverse polarity protected
Short-circuit protection	pulsing
Standards	EN 60947-5-2:2007 IEC 60947-5-2:2007
Standards EN 60947-5-2:2007 IEC 60947-5-2:2007	Standards \| EN 60947-5-2:2007 IEC 60947-5-2:2007
Switching element function	Analog current output with PNP binary NO
Switching hysteresis	0.4 mm
Switching window	± 1 mm
Target	mild steel, e. g. 1.0037, SR235JR (formerly St37-2)
UL approval	cULus Listed Load Type: Resistive Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 100 mA
Width	23 mm

Изображения

Фото · Каталог ChipCross

Документы

К этому компоненту пока не привязаны документы.