Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| No-load supply current | I 0 | < 200 mA |
| Operating voltage | U B | 18 ... 30 V DC , ripple 10 % SS |
| Rated operating current | I e | 3 x 100 mA , short-circuit/overload protected |
| Voltage drop | U d | ≤ 3 V |
| Характеристики по постоянному и переменному току | |
| Impedance | ≥ 4 kΩ |
| Switch-off delay | t off | approx. 30 ms |
| Switch-on delay | t on | approx. 30 ms |
| Time delay before availability | t v | < 500 ms |
| Transducer frequency | 85 kHz |
| Условия эксплуатации и корпус | |
| Ambient temperature | 0 ... 50 °C (32 ... 122 °F) |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Другое | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Connection type | cable PVC , 2 m |
| Core cross section | 0.14 mm 2 |
| Degree of protection | IP65 |
| Diameter | 40 mm |
| Function | in normal operation mode, the function input has to be connected with UB+ or UB- |
| Housing | nickel plated brass; plastic components: PBT |
| Housing nickel plated brass; plastic components: PBT Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam | Housing | nickel plated brass; plastic components: PBT | Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Input type | Function input 0-level: -U B ... -U B + 1V 1-level: +U B - 1 V ... +U B |
| LED green | Display: single-layer material detected |
| LED red | Display: 2-layer or multi-layer material detected |
| LED yellow | Display: no material (air) |
| Length | 90 mm |
| Length 90 mm Diameter 40 mm | Length | 90 mm | Diameter | 40 mm |
| Mass | 300 g |
| Output type | 3 switch outputs PNP, NC |
| Pulse extension | min. 120 ms programmable |
| Pulse length | ≥ 100 ms |
| Sensing range | 50 ... 150 mm , optimal distance: 80 mm |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
| Standards EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 | Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
| Supplementary information | Switch settings of the external programming adapter: "output load": pull-down "output logic": inv |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Изображения
Документы
К этому компоненту пока не привязаны документы.