Pepperl+Fuchs, Inc.Германия
55413
ПроизводитсяFemale connector M12 angled A-coded 8-pin, for cable diameter 5 - 8 mm, shielded, field-attachable
Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| Operating current | I B | max. 2 A |
| Operating voltage | U B | max. 30 V AC/DC |
| Условия эксплуатации и корпус | |
| Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Другое | |
| Body | Zinc diecast, nickel-plated |
| Coding | A-coded |
| Connection | socket |
| Connection socket Construction type M12 Style angled Locking screw connection Number of pins 8 Coding A-coded Customization Coding not rotateable | Connection | socket | Construction type | M12 | Style | angled | Locking | screw connection | Number of pins | 8 | Coding | A-coded | Customization | Coding not rotateable |
| Construction type | M12 |
| Contact surface | gold plated (Au) |
| Core cross section | 0.5 mm 2 / 20 AWG max. |
| Customization | Coding not rotateable |
| Degree of protection | EN 60529 |
| Installation | screw terminals 0.2 Nm pressure nut 0.8 ... 1 Nm body 1 Nm |
| Insulation resistance | min. 100 MΩ |
| Locking | screw connection |
| Mass | 71.91 g |
| Mating cycles | min. 100 |
| Note | installation: shield diameter ≤ 5.5 mm see instruction leaftlet |
| Number of pins | 8 |
| Plug connection | connector M12 x 1 : IEC 61076-2-101 |
| Pollution degree | 3 |
| Screw connection | Zinc diecast, nickel-plated |
| Screw connection Zinc diecast, nickel-plated Body Zinc diecast, nickel-plated Contact surface gold plated (Au) | Screw connection | Zinc diecast, nickel-plated | Body | Zinc diecast, nickel-plated | Contact surface | gold plated (Au) |
| Sheath diameter | 5 ... 8 mm |
| Sheath diameter 5 ... 8 mm Core cross section 0.5 mm 2 / 20 AWG max. | Sheath diameter | 5 ... 8 mm | Core cross section | 0.5 mm 2 / 20 AWG max. |
| Shielding | iris spring shielding |
| Style | angled |
| Surge protection | Category II |
| Tightening torque | 0.6 Nm |
| Tightening torque 0.6 Nm Tool installation straight knurling , hexagon nut SW = 18 mm Mating cycles min. 100 Shielding iris spring shielding | Tightening torque | 0.6 Nm | Tool installation | straight knurling , hexagon nut SW = 18 mm | Mating cycles | min. 100 | Shielding | iris spring shielding |
| Tool installation | straight knurling , hexagon nut SW = 18 mm |
| UL File Number | E363587 |
Изображения
Документы
К этому компоненту пока не привязаны документы.