Pepperl+Fuchs, Inc.Германия
66955
ПроизводитсяPROFINET Gateway with integrated safety monitor, double master for 2 AS-Interface networks, power supply input with decoupling coils
Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| Insulation voltage | U i | ≥ 500 V |
| LED POWER | voltage ON; LED green |
| Power supply | max. 4 A per AS-Interface circuit |
| Rated operating current | I e | approx. 300 mA PELV |
| Rated operating voltage | U e | 26.5 ... 31.6 V from AS-Interface; 24 V DC |
| Характеристики по постоянному и переменному току | |
| Noise immunity | EN 61000-6-4:2007/A1:2011 EN 61000-6-2/AC:2005 |
| Response delay | < 40 ms |
| Switch-on delay | < 10 s |
| Условия эксплуатации и корпус | |
| Ambient temperature | 0 ... 55 °C (32 ... 131 °F) |
| Height | 120 mm |
| Height 120 mm Width 110 mm Length 120 mm | Height | 120 mm | Width | 110 mm | Length | 120 mm |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Другое | |
| AS-Interface | spring terminals, removable |
| AS-Interface specification | V3.0 |
| B 10d | 2.5 E+5 |
| Button | 4 |
| Button MODE | Mode selection PRJ-operation/save configuration/cursor |
| Construction type | Low profile housing |
| Data decoupling | integrated |
| Degree of protection | EN 60529:2000 |
| Diagnostics function | Extended function via display |
| Directive 2006/42/EC | EN 61508:2010 EN ISO 13849-1/AC:2009 EN 62061:2005+A1:2013 |
| Directive 2006/42/EC EN 61508:2010 EN ISO 13849-1/AC:2009 EN 62061:2005+A1:2013 | Directive 2006/42/EC | EN 61508:2010 EN ISO 13849-1/AC:2009 EN 62061:2005+A1:2013 |
| Directive 2014/30/EU | EN 62026-2:2013 EN 61000-6-2/AC:2005, EN 61000-6-4:2007+A1:2011 |
| Directive 2014/30/EU EN 62026-2:2013 EN 61000-6-2/AC:2005, EN 61000-6-4:2007+A1:2011 | Directive 2014/30/EU | EN 62026-2:2013 EN 61000-6-2/AC:2005, EN 61000-6-4:2007+A1:2011 |
| Display | Illuminated graphical LC display for addressing and error messages |
| Duplicate address detection | from AS-Interface slaves |
| Earth fault detection | EFD | integrated |
| EMC monitoring | integrated |
| ESC button | Mode selection traditional-graphical/cancel |
| Functional safety | EN ISO 13849-1:2008/AC:2009, EN ISO 13849-2:2012 (up to PL e), EN 61508:2010 and EN 62061:2005+A1:2013 (up to SIL3) |
| Housing | Stainless steel |
| Housing Stainless steel | Housing | Stainless steel |
| Interface type | PROFINET IO device (IRT) |
| LED AS-i ACTIVE | AS-Interface operation normal; LED green |
| LED AUX | ext. auxiliary voltage U AUX ; LED green |
| LED CONFIG ERR | configuration error; LED red |
| LED ETHERNET | PROFINET master detected; LED green |
| LED IN | 6 x LED green |
| LED OUT | Output circuit closed; 6 x green LEDs |
| LED PRG ENABLE | autom. programming; LED green |
| LED PRJ MODE | projecting mode active; LED yellow |
| LED U AS-i | AS-Interface voltage; LED green |
| Length | 120 mm |
| Mass | 800 g |
| MTTF d | 100 a |
| Number/Type | 6 inputs Safety: 3 x 2 channels Or 6 standard inputs |
| OK button | Mode selection traditional-graphical/confirmation |
| Performance level (PL) | PL e |
| Physical | 2 x RJ-45 |
| PLC-Functionality | activateable |
| PROFINET | RJ-45 |
| Protocol | Media Redundancy Protocol (MRP) |
| Safety Integrity Level (SIL) | SIL 3 |
| Safety output | 6 semiconductor outputs Output circuits: 6 PNP transistor outputs Max. contact load: 1.2 A DC-13 at 30 V DC , Σ = 7.2 A in total (see derating) |
| Shock resistance | EN 61131-2:2004 |
| Switch SET | Selection and setting of a slave address |
| Transfer rate | 100 MBit/s |
| UL approval | An isolated source with a secondary open circuit voltage of ≤ 30 V DC with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed. UL mark does not provide UL certification for any functional safety rating or aspects of the device. |
| UL File Number | E223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source |
| Width | 110 mm |
Изображения
Документы
К этому компоненту пока не привязаны документы.