Поиск аналогов электронных компонентов
69737
Pepperl+Fuchs, Inc.Германия

69737

Производится

Switch Amplifier

Подобрать аналогСпросить AI FAE

Все аналоги

Полный отчёт

Технические параметры

Питание
CurrentI o | 17.1 mA
Input/power supplyreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V eff
Maximum safe voltageU m | 253 V AC (Attention! U m is no rated voltage.)
Maximum safe voltage U m 253 V AC (Attention! The rated voltage can be lower.)Maximum safe voltage | U m | 253 V AC (Attention! The rated voltage can be lower.)
Maximum safe voltage U m 253 V AC (Attention! U m is no rated voltage.)Maximum safe voltage | U m | 253 V AC (Attention! U m is no rated voltage.)
Open circuit voltage/short-circuit currentapprox. 10 V DC / approx. 8 mA
PowerP o | 45 mW (linear characteristic)
Power dissipation≤ 800 mW including maximum power dissipation in the output
Rated currentI r | 15 ... 10 mA + I out
Rated voltageU r | 19 ... 30 V DC
VoltageU o | 10.5 V
Характеристики по постоянному и переменному току
Ripple≤ 10 %
Switching frequency≤ 5 kHz
Условия эксплуатации и корпус
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Dimensions20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
Height119 mm
Height 119 mm Width 20 mm Depth 115 mmHeight | 119 mm | Width | 20 mm | Depth | 115 mm
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
Другое
Collective error messagePower Rail
Configurationvia DIP switches
ConnectionPower Rail or terminals 14+, 15-
Connection sidefield side
Control drawing116-0424 (cULus)
Control drawing 116-0424 (cULus)Control drawing | 116-0424 (cULus)
Control elementsDIP switch
Degree of protectionIEC 60529:2001
Depth115 mm
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)Directive 2014/30/EU | EN 61326-1:2013 (industrial locations)
Directive 2014/34/EUEN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
Directive 2014/34/EU EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
Display elementsLEDs
Electromagnetic compatibilityNE 21:2012 , EN 61326-3-2:2008
EU-type examination certificateEXA 16 ATEX 0016 X
IECEx certificateIECEx EXA 16.0009X
IECEx certificate IECEx EXA 16.0009X IECEx marking Ex nA [ia Ga] IIC T4 Gc , [Ex ia Da] IIIC , [Ex ia Ma] IIECEx certificate | IECEx EXA 16.0009X | IECEx marking | Ex nA [ia Ga] IIC T4 Gc , [Ex ia Da] IIIC , [Ex ia Ma] I
IECEx markingEx nA [ia Ga] IIC T4 Gc , [Ex ia Da] IIIC , [Ex ia Ma] I
InputEN 60947-5-6:2000
Input/Outputreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V eff
Labelingspace for labeling at the front
Line fault detectionbreakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA
MarkingII 3(1)G Ex nA [ia Ga] IIC T4 Gc [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Massapprox. 150 g
Output Isignal ; Transistor
Output IIsignal or fault message ; Transistor
Pulse/Pause ratiomin. 100 µs / min. 100 µs
Rated valuesacc. to EN 60947-5-6 (NAMUR), see manual for electrical data
Response time≤ 200 µs
Safety Integrity Level (SIL)SIL 2
Signal level1-signal: (supply voltage) - 3 V max. for 100 mA 0-signal: blocked output (off-state current ≤ 10 µA)
Signal typeDigital Input
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Switching point/switching hysteresis1.2 ... 2.1 mA / approx. 0.2 mA
Systematic capability (SC)SC 3
UL approvalE106378
Width20 mm

Изображения

Документы

К этому компоненту пока не привязаны документы.