Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| Current output | 4 ... 20 mA , limited to ≤ 35 mA |
| Current range | 0 ... 20 mA , load ≤ 50 Ω |
| Influence of supply voltage | 6.5 ppm/V |
| Power dissipation | 0.4 W |
| Rated voltage | U r | 12 ... 35 V DC loop powered |
| Voltage range | 0 ... 10 V , load ≥ 100 kΩ |
| Характеристики по постоянному и переменному току | |
| Rise time | 250 ms |
| Условия эксплуатации и корпус | |
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) |
| Dimensions | 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1 |
| Height | 107 mm |
| Height 107 mm Width 20 mm Depth 115 mm | Height | 107 mm | Width | 20 mm | Depth | 115 mm |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Temperature effect | span: 0.050 % of span /K ; zero point: 0.060 % of span /K |
| Другое | |
| After calibration | 0.1 % of full-scale value |
| Configuration | via DIP switches via potentiometer |
| Connection | terminals 1+, 2- |
| Connection side | field side |
| Control elements | DIP switch potentiometer |
| Degree of protection | IEC 60529 |
| Depth | 115 mm |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Directive 2014/30/EU EN 61326-1:2013 (industrial locations) | Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Fault signal | downscaling ≤ 3 mA |
| Galvanic isolation | EN 50178 |
| Input/Output | safe isolation according to EN 50178, rated insulation voltage 253 V eff |
| Insulation coordination | EN 50178 |
| Labeling | space for labeling at the front |
| Linearization | ≤ 0.04 % of full-scale value |
| Load | (U -12 V) / 0.02 A |
| Mass | approx. 100 g |
| Signal type | Analog input |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Width | 20 mm |
Изображения
Документы
К этому компоненту пока не привязаны документы.