Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| No-load supply current | I 0 | ≤ 20 mA |
| Operating current | I L | ≤ 100 mA / Output |
| Operating voltage | U B | 18 ... 30 V DC |
| Voltage drop | ≤ 3 V |
| Характеристики по постоянному и переменному току | |
| Repeat accuracy | R | ± 0.05 mm |
| Resolution | 10 µm |
| Условия эксплуатации и корпус | |
| Ambient temperature | -25 ... 80 °C (-13 ... 176 °F) |
| Height | 17.7 mm |
| Height 17.7 mm Width 30 mm Length 39 mm | Height | 17.7 mm | Width | 30 mm | Length | 39 mm |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Temperature drift | ± 0.4 mm in the range 0.5 mm ... 14.5 mm (for 1 mm object distance) |
| Другое | |
| Bending radius | > 10 x cable diameter |
| Cable diameter | 4.8 mm ± 0.2 mm |
| Cable diameter 4.8 mm ± 0.2 mm Bending radius > 10 x cable diameter Material PUR Core cross section 0.25 mm 2 Shield yes Length L 1 m | Cable diameter | 4.8 mm ± 0.2 mm | Bending radius | > 10 x cable diameter | Material | PUR | Core cross section | 0.25 mm 2 | Shield | yes | Length | L | 1 m |
| Communication interface | IEC 61131-9 / IO-Link V1.1.3 |
| Compatible master port type | Class A Class B |
| Connection type | fixed cable with plug |
| Core cross section | 0.25 mm 2 |
| Degree of protection | IP65 |
| Device ID | 2098433 (0x200501) |
| Device profile | Identification and Diagnosis - I&D Smart Sensor - SSP 0 Smart Sensor - SSP 3.1 |
| Diagnostic Coverage (DC) | 0 % |
| Housing | Zinc diecast, nickel-plated cover , PBT |
| Housing Zinc diecast, nickel-plated cover , PBT Target mild steel, e. g. 1.0037, SR235JR (formerly St37-2) | Housing | Zinc diecast, nickel-plated cover , PBT | Target | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) |
| Interface type | IO-Link (via C/Q = Pin 4) |
| IO-Link revision | 1.1 |
| Length | L | 1 m |
| Linearity error | ± 0.3 mm (for 1 mm object distance) |
| Mass | 75 g |
| Material | PUR |
| Measuring range | 0 ... 15 mm |
| Min. cycle time | 3 ms |
| Mission Time (T M ) | 20 a |
| MTTF d | 830 a |
| Number of pins | 3 |
| Object distance | 0.5 ... 2 mm |
| Output type | 1 Push-pull (4 in 1) output , short-circuit protected , reverse polarity protected , overvoltage protected , programmable |
| Process data | Input 4 byte - Measurement value 16 bit - Scale 8 bit - Signal quality indicator 2 bit - Switching signal 1 1 bit - Switching signal 2 1 bit |
| Reverse polarity protection | reverse polarity protected |
| Shield | yes |
| Short-circuit protection | pulsing |
| SIO mode support | yes |
| Standards | EN IEC 60947-5-2 |
| Standards EN IEC 60947-5-2 Communication interface IEC 61131-9 / IO-Link V1.1.3 | Standards | EN IEC 60947-5-2 | Communication interface | IEC 61131-9 / IO-Link V1.1.3 |
| Switching element function | Push-pull (4 in 1) output |
| Switching hysteresis | 3-step, adjustable 0.4 ... 1 mm |
| Target | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) |
| Threading | M12 |
| Threading M12 Number of pins 3 | Threading | M12 | Number of pins | 3 |
| Transfer rate | COM2 (38.4 kBit/s) |
| UL approval | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 100 mA |
| Vendor ID | 1 (0x0001) |
| Width | 30 mm |
Изображения
Документы
К этому компоненту пока не привязаны документы.