StegoГермания
CSS-014-A
ПроизводитсяDer Smart Sensor misst Temperatur sowie Luftfeuchte und überträgt Signale analog. Die umgewandelten Messwerte werden als standardisiertes analoges 4 – 20 mA Signal weitergegeben. Empfänger der Daten des Smart Sensors sind Steuerungs- und Überwachungseinheiten für industrielle Anlagen und Maschinen.
Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| Operating voltage | 24 V |
| Power consumption | 1.8 W (typically 0.4 W) W |
| Условия эксплуатации и корпус | |
| Height | 140 mm |
| Mounting | Clip for 35 mm DIN rail, EN 60715 and M5 screw fixing |
| Operating temperature | -40 °C - 70 °C |
| Storage temperature | -40 °C - 85 °C |
| Другое | |
| AC/DC | DC |
| Casing | Plastic to UL94 V-0, light grey |
| Connection | M12 round plug, IEC 61076-2-101, 4-pin, A-coded, shielded |
| Depth | 38 mm |
| Design | 4 - 20 mA |
| Device type | Analog products |
| Electrical protection | Reverse polarity protection, short-circuit proof, overvoltage protection |
| Load resistance external | ≤ 500 Ω |
| Measurement range | -40 °C - 60 °C |
| Measurement range 2 | 0 % RH - 100 % RH |
| Measurement range tolerance | ± 1 K |
| Measurement range tolerance 2 | ± 4 % RH |
| Measurement signal | Temperature, air humidity |
| Note | Tolerance from 20 to 80% rH/ tolerance from +5 to +60°C (please request diagram to view tolerances outside these ranges). The circuit board is painted on both sides with a certified protective lacquer to protect against condensation and thus corrosion and to increase creepage resistance. |
| Operating humidity | ≤90 % RH |
| Protection class | III |
| Protection type | IP20 |
| Reaction time | 1: t60 <195 s / 2: t60 <14 s |
| Storage humidity | ≤90 % RH |
| Weight | 50 g |
| Width | 40 mm |