NIDEC COMPONENTS products lineup, You can refer to the detail of Slide switch CUS. CUS-12TB, CUS-13TB, CUS-14TB, CUS-22TB CUS12TB, CUS13TB, CUS14TB, CUS22TB
Все аналоги
Полный отчётТехнические параметры
| Условия эксплуатации и корпус | |
|---|---|
| High temp. exposure | 85 °C, 96 h, No load |
| Low temp. exposure | - 40 °C, 96 h, No load |
| Operating temp. range | - 20 ~ 70 °C |
| Storage temp. range | - 40 ~ 85 °C |
| Thermal shock | - 40 (0.5 h) ~ 85 °C (0.5 h), 5 cycles |
| Другое | |
| Contact rating | Non-switching: 50 VDC 100 mA Switching: 4 VDC 300 mAMinimum: 20 mVDC 1 μA |
| Contact resistance | 70 mΩ maximum |
| Contact timing | Non-shorting |
| Dielectric strength | 100 VAC 60 s |
| Humidity | 40 °C, Relative humidity 90 ~ 95 %, 240 h, No load |
| Insulation resistance | 100 MΩ minimum (100 VDC) |
| Load life | Continuous load 10000 cycles, 4 ± 0.5 VDC, 300 ± 10 mA |
| Net weight | Approx. 0.08 g (CUS-12) Approx. 0.10 g (CUS-13) Approx. 0.13 g (CUS-14) Approx. 0.11 g (CUS-22) |
| No. of positions | 2, 3, 4 |
| Operating force | CUS-12 ※112 ± 1.7 N {0.2 ± 0.17 kgf} CUS-13 ※2：A → B : 1.5 ± 1.2 N {0.15 ± 0.12 kgf}B → C : 2 ± 1.7 N {0.2 ± 0.17 kgf} C → B : 1.5 ± 1.2 N {0.15 ± 0.12 kgf} B → A : 2 ± 1.7 N {0.2 ± 0.17 kgf} CUS-14 ※3 A → B : 1.5 ± 1.2 N {0.15 ± 0.12 kgf} B → C : 2 ± 1.7 N {0.2 ± 0.17 kgf} C → D : 2 ± 1.7 N {0.2 ± 0.17 kgf} D → C : 1.5 ± 1.2 N {0.15 ± 0.12 kgf} C → B : 2 ± 1.7 N {0.2 ± 0.17 kgf} B → A : 2 ± 1.7 N {0.2 ± 0.17 kgf} CUS-22 ※42 ± 1.7 N {0.2 ± 0.17 kgf} |
| Pull-off strength | 5 N {0.5 kgf} 10 s |
| Sealing | Non washable |
| Shear | 5 N {0.5 kgf} 10 s |
| Shock | 490 m/s2, 11 ms, 6 directions for 3 times each |
| Solderability | 245 ± 3 °C 2 ~ 3 s |
| Soldering heat | Reflow peak: 250 ~ 255 °CManual soldering: 350 ± 10 °C 3 ~ 4 s |
| Stop strength | 10 N {1.02 kgf} 15 s |
| Stroke | 1.5 mm |
| Substrate bending | Width 90 mm, bend 3 mm, 5 s, 1 time |
| Vibration | Amplitude 1.5 mm or Acceleration 98 m/s2, 10-500-10 Hz, 3 directions for 10 cycles each |