The LP6452AT/F is a synchronous buck converter supporting up to 2A output current. The LP6452AT/F employs an adaptive constant-on-time (COT) control scheme to achieve fast load transient response. The external components are minimized, requiring only one inductor, two resistors, and two capacitors. The LP6452AT/F supports both aluminum polymer capacitors and ceramic capacitors without extra compensation components. The LP6452AT/F integrates PFM (Pulse Frequency Modulation) operation, which helps maintain the system efficiency at light load. The LP6452AT/F also integrates multiple protection functions, i.e., over-current protection (OCP), over-temperature protection (OTP), under-voltage lockout (UVLO), and short circuit protection (SCP). The LP6452AT/F is available in a small 6-pin 1.6mmΧ1.6mm SOT563 package.
Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| FB电压(V) | 0.6 |
| 输入电压(V) | 4.2-18 |
| 输出电压(V) | 0.6-7 |
| 输出电流(A) | 2 |
| 输出通道数量 | 1 |
| Характеристики по постоянному и переменному току | |
| 工作频率(Hz) | 1.2M |
| 电压精度 | ±1% |
| Другое | |
| EN控制 | Y |
| 产品特征/功能 | COT,Internal Soft Start,OCP,SCP,OTP |
| 工作模式 | Syn. |
| 轻负载模式 | FCCM |
Изображения
Документы
К этому компоненту пока не привязаны документы.