Alps AlpineЯпония
SPVT Series SPVT110202 Type : Horizontal / Two-way operation type ･ Rating (max.) : 50mA 20V DC ･ Operating force : 0.4N max. ･ Operating life(Without load) : 100,000 cycles
Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| Sections to be Tested for Withstand Voltage and Insulation Resistance | Between terminal and shaft (lever). Between terminal and metal cover (frame). |
| Voltage proof | 100V AC for 1 minute |
| Withstand Voltage | Applies AC voltage to the specified spot for a minute and then checks for arc, burning, dielectric breakdown and other abnormalities. Respective terminals may be tested as a group. The sections described below shall be tested unless otherwise specified. However, if the section concerned is so constructed as to conduct, that particular part shall not be tested. |
| Характеристики по постоянному и переменному току | |
| Shaft (Lever) Strength against Push/Pull Actions | Applies a specified force in the axial direction of the shaft (lever) for 19 seconds and then checks the operating part and other sections for deformation, breakage, operating conditions, etc. |
| Условия эксплуатации и корпус | |
| 1 case / export packing | 10,000 |
| 1 case / Japan | 5,000 |
| Dimensions (W×D×H) | 4.7×5.6×1.9mm |
| Export package measurements (mm) | 417×409×139 |
| Number of packages (pcs.) | 1 reel 2,500 1 case / Japan 5,000 1 case / export packing 10,000 |
| Operating temperature range | -40℃ to +85℃ |
| Soldering temperature | 350±5℃ |
| Другое | |
| 1 reel | 2,500 |
| Actuator strength | 10N |
| Cold | -40℃ 96h |
| Contact resistance(Initial/After operating life) | 500mΩ max./1Ω max. |
| Damp heat | 40℃, 90 to 95%RH 96h |
| Discontinued | The product is no longer produced or sold. |
| Dry heat | 85℃ 96h |
| Durability | Operating life without load 100,000 cycles 1Ω max. Operating life with load Rating(max.)(Resistive load) 100,000 cycles 1Ω max. |
| Electrical performance | Contact resistance(Initial/After operating life) 500mΩ max./1Ω max. Insulation resistance 100MΩ min. 100V DC Voltage proof 100V AC for 1 minute |
| Environmental performance | Cold -40℃ 96h Dry heat 85℃ 96h Damp heat 40℃, 90 to 95%RH 96h |
| Export | 10,000 |
| Insulation Resistance | Applies specified voltage to the specified locations and then measures the insulation resistance with a megger. The locations described below shall be tested unless otherwise specified. However, if the section concerned is so constructed as to conduct, that particular part shall not be tested. |
| Insulation resistance | 100MΩ min. 100V DC |
| Japan | 2,500 |
| Location lug | Without |
| Mechanical performance | Terminal strength 0.5N for 1 minute Actuator strength 10N |
| Minimum order unit(pcs.) | Japan 2,500 Export 10,000 |
| Not Recommended for New Designs | It is currently produced to support customers using it for already existing designs. Please do not use the product for new designs. |
| Operating direction | Right |
| Operating force | 0.4N max. |
| Operating life with load Rating(max.)(Resistive load) | 100,000 cycles 1Ω max. |
| Operating life without load | 100,000 cycles 1Ω max. |
| Poles | 1 |
| Positions | 1 |
| Rating(max.)/(min.)(Resistive load) | 50mA 20V DC/100μA 3V DC |
| Rotational Torque (Operating Force) | Measures the torque (operating force) necessary to rotate (move) the shaft (lever). Unless otherwise specified, measurement shall be made at ambient temperatures of 5 to 35°C, the shaft rotational speed shall be 60° per second, and the lever traveling speed shall be 20mm per second. |
| Semi-Standard | The product is a semi-custom or optional product. It is mass-produced and may be used for new designs. |
| Shaft Wobble | Measures the amount of deflection at the specified position from the reference plane, with the specifiedbending moment, applied perpendicularly to the shaft from directions 180 degrees with respect to each other. |
| Side terminal | With both sides. |
| Soldering time | 3s max. |
| Standard | The product is mass-produced and recommended for new designs. |
| Tape width (mm) | 16 |
| Terminal strength | 0.5N for 1 minute |
| Terminal type | For PC board (Reflow) |
| Under Development | The product is in the development stage and not yet mass-produced. |