ath2000
ПроизводитсяThe motor modules with the product designation ATH200x are elements for the construction of straight XTS track sections for demanding environmental conditions...
Все аналоги
Полный отчётТехнические параметры
| Питание | |
|---|---|
| Control voltage | 24 V DC -15/+20% |
| Operating voltage | 48 V DC |
| Peak current | < 48 A |
| Power consumption control voltage | 30 W per meter travel distance |
| Rated current | 16 A |
| Rated power | 768 W |
| Характеристики по постоянному и переменному току | |
| Absolute accuracy | < ±0.25 mm within a straight module |
| Positioning accuracy | < ±0.15 mm @ 1.5 m/s within a straight module |
| Условия эксплуатации и корпус | |
| Ambient temperature (operation) | 0…40°C |
| China-RoHS | www.beckhoff.com/china-rohs-motion |
| Height | 96 mm |
| REACH Annex XIV | compliant |
| REACH Annex XVII | compliant |
| REACH SVHC | Lead, Triphenyl phosphate |
| RoHS | compliant with exemption |
| RoHS exemption | 6c: Copper alloy with a mass fraction of up to 4% lead, 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors |
| Другое | |
| Alignment | horizontally, vertically or at any angle from 1…179° |
| Approvals/markings | CE, UL |
| ATH2000-0250 | stainless steel motor module, straight, 48 V DC/24 V DC, protection rating IP69K, 250 mm x 34 mm x 96 mm (L x W x H), 4.7 kg, UL-certified |
| ATH2000-0250-0002 | stainless steel motor module with cover for guide rail mounting surface, straight, 48 V DC/24 V DC, protection rating IP69K, 250 mm x 34 mm x 96 mm (L x W x H), 4.9 kg, UL-certified |
| CA Prop65 | www.beckhoff.com/prop65 |
| CAS No. | 7439-92-1, 115-86-6 |
| Connection technology | cover between the motor modules (daisy chaining) |
| Continuous force | ATH9001-x550 (5-pin): 30 N, ATH9001-xAA0 (10-pin): 55 N (specification refers to straight sections) |
| Cooling | convection |
| Cycle time | 250 µs |
| Design form | straight |
| Diameter | 180° curved segment: 267 mm (clothoid), 45° curved segment: 637 mm (1) |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
| Electrical data | ATH2000 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Geometries | rectangle, square, circle or straight |
| Length | 250 mm |
| Length per feed | max. 3 m (voltage supply, EtherCAT) |
| Magnet pitch | ≥ 60 mm |
| Material | housing: stainless steel 1.4404 AISI 316L; sealing: VMQ silicone |
| Material compliance | ATH2000 |
| Material compliance | SCIP | SCIP No. |
| Max. acceleration | 10 g |
| Max. speed | 4 m/s |
| Mechanical data | ATH2000 |
| Motor length | 250 mm |
| Motor type | long stator linear motor segment |
| Ordering information | XTS Hygienic: stainless steel motor modules |
| Payload | up to 4 kg, higher loads with reduced dynamics |
| Peak force | ATH9001-x550 (5-pin): 90 N, ATH9001-xAA0 (10-pin): 145 N (specification refer to straight sections) |
| POP | compliant |
| Protection rating | IP69K (in assembled condition for a closed system) |
| Repeatability | < ±0.01 mm (standstill unidirectional) |
| System data | ATHxxxx-xxxx |
| Technical data | ATH2000 |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| Weight | 4.9 kg |
| Width | 34 mm |