Результаты поиска:9579

SHEET METAL SCREW HEX SLOTTED #8

SWITCH ROT 4POS KEY SCREW

SWITCH ROT 4POS KEY SCREW

SHEET METAL SCREW HEX SLOTTED #8

SWITCH ROT 4POS KEY SCREW

SCREWDRIVER SET TORX 6PC

Hyperfast Rectifier, 2 A FRED Pt®

Double sheet sensor

SCREWDRIVER SET TORX 7PC

SOT-227 Power Module Single Switch - Power MOSFET, 420 A

Ethernet bus cable M12 plug angled D-coded to RJ45 Ethernet-coded, 4-pin, PUR cable blue, Cat5e, shielded

SWITCH IGNST 4POS

ROT SW IGN 4POS KEYED

Part Number: 9379053002 79 EQ Core-EQ13/2.9/8.7 Planar EQ and EQI cores, with their low profile, are suitable for board level installation allowing assembly without the need for plastic coilformers and can also allow windings integrated into multi-level PCBs. Planar EQ cores with their low mass and low profile are suitable for Surface Mount installations in low power filter and transformer applications. – Planar EQ and EQI cores can be supplied with the center post gapped to a mechanical dimension, or an A value. 0.8 (g) Σl/A : Core Constant, l : Effective Path Length, A : Effective Cross-Sectional Area, V : Effective Core Volume A : Inductance Factor Explanation of Part Numbers: Digits 1 & 2 = product class and 3 & 4 = material grade. A value is measured at 1 kHz, B < 10 gauss. is mated with . A new high frequency material for power applications up to 750 kHz. This MnZn power ferrite is available in customer specific core designs. This material is available as special order for customer specific applications. **** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Part Number: 9579180302 79 ER CORE Planar EE and EI cores, with their low profile are suitable for board level installation allowing assembly without the need for plastic coil formers and can also allow windings integrated into multi-level PCBs. Planar ER cores with their low mass and low profile are suitable for Surface Mount installations in low power filter and transformer applications. -Planar EE, ER and EI cores can be supplied with the center post gapped to a mechanical dimension, or an A value. 1.85 (g) Σl/A : Core Constant, l : Effective Path Length, A : Effective Cross-Sectional Area, V : Effective Core Volume A : Inductance Factor Explanation of Part Numbers: Digits 1 & 2 = product class and 3 & 4 = material grade. A value is measured at 1 kHz, B < 10 gauss. A new high frequency material for power applications up to 750 kHz. This MnZn power ferrite is available in customer specific core designs. This material is available as special order for customer specific applications. **** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

FERRITE CORE EQ 2.44UH 79

FERRITE CORE EQ 2.44UH 79

Part Number: 9579250602 79 EQ Core-EQ25/5.6/18 Planar EQ and EQI cores, with their low profile, are suitable for board level installation allowing assembly without the need for plastic coilformers and can also allow windings integrated into multi-level PCBs. Planar EQ cores with their low mass and low profile are suitable for Surface Mount installations in low power filter and transformer applications. – Planar EQ and EQI cores can be supplied with the center post gapped to a mechanical dimension, or an A value. 8.2 (g) Σl/A : Core Constant, l : Effective Path Length, A : Effective Cross-Sectional Area, V : Effective Core Volume A : Inductance Factor Explanation of Part Numbers: Digits 1 & 2 = product class and 3 & 4 = material grade. A value is measured at 1 kHz, B < 10 gauss. is mated with . A new high frequency material for power applications up to 750 kHz. This MnZn power ferrite is available in customer specific core designs. This material is available as special order for customer specific applications. **** Characteristic curves are measured on standard Toroids (18/10/6 mm) at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.